Announcement

Collapse

Forum Rules *ALL NEW MEMBERS, PLEASE READ!! UPDATED!!*

First and foremost, Welcome to the Badcaps Capacitor Search Engine & Forums!

New members that have activated their accounts have limited access to certain features of the site until established. Members with zero posts have no access to the private messaging system. Also, members with zero posts may not edit certain profile attributes, such as signatures. New members also may not create new threads. However, new members with zero posts have full access to all technical information contained on this forum, and that also includes attachments (images and files that other members have uploaded), and new members that have activated their accounts are free to post replies to existing threads. If you wish to create a new thread, the fix is simple! All you need is ONE post to be able to have full unrestricted access, and that can be simply posting an introduction of yourself or say hello in THIS THREAD. This may seem a little strange, but it helps keep spam and abuse curved. Please note, that it may take up to one hour from your first post for the limits to be removed. If you make a post and don't immediately see the restrictions gone, be patient. The promotion system updates every hour.

Please complete your profile after making your first post, with your name, locale, and other info. It's nice to know members on a first name basis, and know where they're from. Makes for a much friendlier environment!

Posting rules for this forum will be STRICTLY enforced by myself as the owner/administrator, and my moderator crew.

Badcaps.net IS A BUSINESS!!! If you are a servicer, service center, or vendor of any kind in the computer/capacitor industry, you are NOT permitted to advertise, link, promote, or plug your business on this forum in ANY way! NO EXCEPTIONS!! This includes asking for "donations" in exchange for BIOS passwords or tech advice for anything! If I see you doing that, your post will be edited or deleted, and you warned. If it happens again, you will be banned. The only exceptions are the references to the companies quoted in the FAQ which the administration have added for the convenience of those around the world who have difficulty to source caps for their repair.

This also includes using this forum's private message system to solicit business. Members, if you receive a PM from anyone offering repair services or components, please alert me immediately! Myself or any of my moderators, will never private message a user soliciting business, for Badcaps.net, or any other servicer/vendor. If you PM me about repairing your device, I will reply and take care of you, however, I will not message you first.

------------------------------------

Posting rules:

This forum was created to be a technical support forum primarily for the do-it-yourselfers who choose to repair their own boards. Any and all technical questions are welcome!

1) Please use the SEARCH feature!! Your question may have been answered in another thread! Please search first and see if it has!

2) When posting a technical question, be as detailed as possible in your thread. The more information we have about your specific problem, the better we can answer your question.

3) Please use COMPLETE sentences, punctuation, and grammar! Nobody is perfect, hence, a spelling error on occasion is no biggie. However, posts/threads that are unreadable will be deleted. This includes any and all forms of 'ebonics', leet, chatroom jargon, and 'text message' shorthand and slang. This forum is not a chatroom/text message, please use full words and complete sentences.

4) Keep discussion on topic!! DO NOT HIJACK THREADS! It's easy to do (I've done it myself a few times...) Lets try to keep it down to a minimal!! If you have something really off topic, that's what the lounge is for!

5) Keep things civil! There will be no tolerance for flaming, bashing, hateful remarks, racial remarks, adult material of ANY kind, and so on.

6) THE LOUNGE RULES! The lounge is a place for off topic chit-chat! If you post something that might be considered questionable or something you don't want kids to see, or something you can't view at work/school, etc, please label that thread *NWS* or NOT WORK SAFE in the thread title as a warning. The Lounge is NOT moderated, anything is welcome... Feel free to post rants, jokes, cars, hot women (remember the NWS warning in the title), or just about anything within reason. It's an open forum! Please refrain from participating in political topics if you have thin skin, they can get heated sometimes!! Remember that we have members here from all over the world, with many different views and cultures. Political debates can turn really ugly, and really fast, and if they degrade to personal attacks and useless banter/bashing, moderator action will ensue. I want this forum to be a safe haven for technical discussions from all walks of life, so lets keep off topic discussions civil and friendly.

7) Spamming and spammers will NOT be tolerated or accepted in any way, shape, or form! Spam bots are instantly and permanently banned, and their threads deleted! The mod crew is really quick to zap spammers, we typically pop them before they even get to post. This also includes regular members as well. be courteous and not post spam. This includes links to off-site information that's not relevant to the thread at hand. Do not plug other websites, forums, or businesses in your signatures. You may do so in a thread if the off-site link you're posting is relevant to the topic, but otherwise, don't do it. If you see a thread which clearly a spam bot posting that we have not removed yet, DO NOT click any links in it!! Simply click the 'report bad post' button, and it'll be taken care of, usually within minutes.

8) Account removals & closures: Since no personal information is given in the creation of your Badcaps.net Forum account, requests to remove and/or delete accounts will be declined. Any requests for removal of threads & posts you created will also be declined. The reason is the missing posts can/will leave threads incomplete and fragmented. For the threads to be of help to others later on, information can't and won't be missing. However, if you inadvertently posted personal identifiable information in a post (such as an email address, real name, or phone number), please contact a staff member. In those cases, the post may be edited or removed, at the staff members discretion.

That's about it for the rules, the setup here is pretty loose. However, if you're caught violating any of the rules above, here's what will happen:

First offense: Warning by me or a moderator
Second offense: Banning for 1 day
Third offense: Banning for 3 days
Fourth offense: Banned permanently.

If you do something really dumb, or are just a troll, I will skip the warning and the temporary banning, and ban you permanently!

The rules are pretty cut and dry... However, if you have any questions about this policy, feel free to contact me.
See more
See less

Tools - Order of purchase

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tools - Order of purchase

    Hey guys,

    I am new to the electronics repair game & have stumbled into some tools to get my workshop (garage) started.

    I managed to get my hands on a low budget multi-meter, soldering iron, de-soldering gun, oscilloscope and a variable voltage/amperage DC power supply.

    With this being a new hobby i am thinking of investing in some tools to make it a little easier.

    When i get paid next i was thinking of buying a Peak Atlas ESR 70 gold.

    I am after suggestions on what order to buy things because i don't have the money to buy everything all at once.

    I have most tools like screw drivers, pliers, sockets/spanners etc.

    Any suggestions would be appreciated.

    I have been mostly tinkering with broken machines / appliances so far have not really got my hands on any computers or phones that require working at an extra small scale.

    Thanks.

    #2
    Re: Tools - Order of purchase

    Make yourself something called a dim bulb tester. Very useful to have. Also if your oscilloscope that plugs into power mains circuit, you want an isolation transformer. Other than that, you should be kittet out pretty darn good for starters. Not so sure what you mean by low cost DMM… you may want a second and a bit better quality DMM. A electronic microscope is also important, depending on your eyesight and component size.

    Comment


      #3
      Re: Tools - Order of purchase

      Nice bit of kit the Peak but a cheap component tester from ali/ebay will measure your caps to let you know which are faulty.

      Comment


        #4
        Re: Tools - Order of purchase

        "Any suggestions would be appreciated."

        If you plan to work with smd (nowadays is almost all that), then hotair station and some magnification, fine pick and tweezers, fine hammer, files... little brushess for cleaning, ipa, little organiser for screws...

        Cheap transistor testers work wery well for me... no point to buy expensive one?
        Think about a eprom programmer, if you unsure, a low cost is ch341a always handy to have.
        Desoldering wick, nontoxic flux... little boxes with common components, good light...

        But, you can do build some simpe DIY measure tool for your specific interest, need.

        Comment


          #5
          Re: Tools - Order of purchase

          I would invest in a good DMM. It may save your life someday. Also, maybe a selection of common components might help

          Comment


            #6
            Re: Tools - Order of purchase

            Hey guys thanks for the suggestions.

            I will definitely make a dim bulb tester. Thanks for bringing that to my attention.

            I have ordered the Esr tester so will hopefully get that next week. On a side note I do want to buy a transistor tester/component tester too.

            Not up to SMD yet but hopefully my skills will get there in the future and I will get the equipment required.

            In terms of Dmm any suggestions? There is a significant difference between the prices. Is something like the Digitech qm1321 sufficient? Significantly cheaper than something like a fluke. I was looking at the qm1321 in the local Jaycar today.

            Will add a photo of my little setup when I get a chance.

            Thanks.

            Comment


              #7
              Re: Tools - Order of purchase

              what desoldering gun is it?
              infact make a detailed list if stuff - not a vague one.

              Comment


                #8
                Re: Tools - Order of purchase

                De-soldering gun is a Micron T2065
                Soldering Iron is a Micron T2417
                Oscilloscope is a Hantek DSO4254C
                Power supply is a Tenma 72-2640
                Multimeter is a Micron 1130A

                On order is the Peak ESR70

                Comment


                  #9
                  Re: Tools - Order of purchase

                  you need to post a link for the meter, i cant find it.
                  the iron looks like a xytronics unit,
                  the desoldering station is a typical ZHONGDI unit.
                  http://china-zhongdi.com/product/27.html

                  dont buy filters for the zhongdi, they are a robbery!
                  check the internal diameter of the glass, i think it's about 19mm
                  if it is then get a 20mm leather punch from china and a sheet of filter material - we can find links for you.
                  search this area of the forum for "915" - the model number of the older desugn

                  Comment


                    #10
                    Re: Tools - Order of purchase

                    Sorry, that’s because I mucked up the name. It’s the Q1130A.

                    https://core-electronics.com.au/auto...ter-22528.html

                    Sounds good i will take a lock for the filter material have not had to change it yet.

                    Comment


                      #11
                      Re: Tools - Order of purchase

                      Quick update on the progress
                      The Peak Atlas ESR meter has arrived and has been doing some good work.
                      I ended up upgrading my multimeter to a QM1571.

                      I think next in the list is a component analyser and some cable management/desk organisations.
                      Attached Files

                      Comment


                        #12
                        Re: Tools - Order of purchase

                        Originally posted by stj View Post
                        you need to post a link for the meter, i cant find it.
                        the iron looks like a xytronics unit,
                        the desoldering station is a typical ZHONGDI unit.
                        http://china-zhongdi.com/product/27.html

                        dont buy filters for the zhongdi, they are a robbery!
                        check the internal diameter of the glass, i think it's about 19mm
                        if it is then get a 20mm leather punch from china and a sheet of filter material - we can find links for you.
                        search this area of the forum for "915" - the model number of the older desugn
                        If anyone wants to buy one get the one with the sleep function it helps save your heater element i have one but it not this model number but it is from the same company
                        9 PC LCD Monitor
                        6 LCD Flat Screen TV
                        30 Desk Top Switching Power Supply
                        10 Battery Charger Switching Power Supply for Power Tool
                        6 18v Lithium Battery Power Boards for Tool Battery Packs
                        1 XBox 360 Switching Power Supply and M Board
                        25 Servo Drives 220/460 3 Phase
                        6 De-soldering Station Switching Power Supply 1 Power Supply
                        1 Dell Mother Board
                        15 Computer Power Supply
                        1 HP Printer Supply & Control Board * lighting finished it *


                        These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

                        1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
                        2 Hem Saw Computer Stack Board

                        All of these had CAPs POOF
                        All of the mosfet that are taken out by bad caps

                        Comment


                          #13
                          Re: Tools - Order of purchase

                          or turn it off when your not using it
                          a bit radical i know, but not difficult!
                          i know a guy that accidentally left his soldering iron on for 3 days!
                          he forgot to turn it off on friday night before locking his shop up.

                          Comment

                          Working...
                          X