Re: Eeprom dump thread!
thanks you
thanks you
-
-
Re: Eeprom dump thread!
Hi Please HELP,
I need dump spi flash WINBOND 25X100CLNIG TV Elenberg 32dh5130
MAIN BOARD: TP.MS338.PB801
PANEL NO: MLTY315A082Comment
-
Re: Eeprom dump thread!
LG43LH5100-ZE
Mainboard:- LD67B EAX66826106(1.0) 2016.01.06 R.C.B.
Panel:- HC430DUN-SLVX1-511X
Tcon:- P/N 6870C-0532A
IC1300 & IC104 Bin filesLast edited by dick_barton; 02-26-2021, 09:41 AM.Willing to help but I'm no expert.Comment
-
Re: Eeprom dump thread!
MAIN BOARD 17MB95 23197474 FOR TOSHIBA 40L3453DB TV SCR: VES400UNDS-2D
U10 and U11 Bin FilesComment
-
Re: Eeprom dump thread!
Submitted by jimbofz
Technika 40-E271
Panel num:LTA400 HM 23001
Main board :TMSD 306 69a 12023
Theres 2 bin files extract to clean usb ,insert and apply mains wait 20 mins to complete , it took me 3 attempts before it would accept the f/wWilling to help but I'm no expert.Comment
-
Re: Eeprom dump thread!
PLEASE BADCAPS HELP ME TO FIND THiS DUMP FOR
SIERRA LED TV model 32hd125
chassis 17MB82S
panel VES315WNVS-01-B.Comment
-
Re: Eeprom dump thread!
Hello. Need firmware Tevion
model: MD-20186 DE-S
chassis: 17MB46-2
panel: LTM185AT01
Thanks!Comment
-
Re: Eeprom dump thread!
Hi,
I need Firmware:
Medion/vestel
BOARD: 17MB130P ?V3(NOT SURE)
PANEL: VES490QNDL-2D-N31 (LG32)
PS: 17ips72
Thank you in advance....Comment
-
Re: Eeprom dump thread!
tak you so mutch bro !
but ! this television does not light up any more only the led of power flash, dance I think it is necessary to pass dump firmware for the two eeprom spi - Q16 / Q64 .Comment
-
Re: Eeprom dump thread!
I need lg 42lw570s bios, motherboard eax63686303, tv has sound no picture, red light flashing, what can I do thanks.Comment
-
Re: Eeprom dump thread!
Looking for an eeprom dump from the tcon of a Westinghouse WD40FW2610Comment
-
Re: Eeprom dump thread!
Hi, everyone. Television stuck on "BUSH" welcome screen.
Red light flashing continuously.
Power Supply working fine... 3.3 vol. still on 25L1606E.
Therefore, I think that reprogramming of SPI Flash should sort out the problem.
Looking for a BIN file for this TV.
BUSH TV
Model: DLED32265HDDVDBX
MainBoard: VESTEL 17MB97
PowerBoard: VESTEL 17IPS62
Panel: VES315WNDL-2D-N14
Thank you in advance for any help.
RegardsComment
-
Re: Eeprom dump thread!
I need a dump for Westinghouse WD40FW2610 tcon board number 1P-0149J00-4011 or k0075zl. I have a dump from a k0075zn tcon that needs the screen flipped to work and theres no option in the service menu. I can upload the dump incase anyone can edit it.Comment
-
Re: Eeprom dump thread!
Vizio E320-A0 U54 EEPROM zip file
Main Board: 3632-2112-0150Last edited by RDC55; 05-04-2021, 08:58 AM.Comment
-
Re: Eeprom dump thread!
thank you so muchComment
-
Re: Eeprom dump thread!
Please I need dump for Toshiba*55l6200u eeprom. Thank you!Comment
-
Re: Eeprom dump thread!
tv
FIRMA: Vivax
MODEL:Lcd tv-3250
MODEL DODATNO: Tv 3250SM1212D306
MAINBOARD:Sinho 090-DM306K-00
PANEL:V315H-L02 Rec.C1
Power:AY130P-4HF12
Memorija-W25Q64 Plizz firmware,dumpComment
-
Re: Eeprom dump thread!
Looking for:
Mark: Silver
Model: IP-LE32/495523
Chassis (main board, components): TP.MS3663S.PB818
LCD Screen/Panel (if exist): D32-M30 32JP2006024000106701Comment
-
Re: I-JOY idi22spb 05 V2
Hi someone says the instructions for entering service menu in HK-7050-CI-V4.1-B ?Comment
-
Good day to all, I have a big problem. I can't find the eeprom dump for the Eizo CS2740 monitor. The device doesn't turn on, the indicator just lights up. It responded to connecting to the PC once. The update process started with the standard program and then disconnected from the computer. The computer doesn't detect it anymore. If anyone has an eeprom dump, please share.07-26-2025, 03:24 PM -
Hello, This might be a long shot, but I'm looking for an EEPROM dump for a HP Photosmart C4280 All-in-one printer.
The printer seems to be in cartridge alignment mode. Sometimes it print the alignment page and then hangs during the scanning step, sometimes it hangs during the printing process and sometimes it hangs during the boot process. If I let it idle for a while then it flashes the back-light of the top screen and there's a letter E. Bottom screen is asking me to restart it to no avail. I have to remove the power cable from the printer for a couple of minutes to make it work...02-17-2022, 09:09 PM -
Good day to every one,
I have AVR 171 the IC1504 (24C32) eeprom is corrupted not able to read.
Does anybody have an eeprom dump file? I really appreciate any help.
Thanks in advance.07-01-2024, 09:04 PM -
P14s Gen 2
HT4B0/HP4B0/HT5B1/HT4B2
NM-D352 Rev 1.0
sn PF-35P15W
Requesting thunderbolt dump
also attached is the tbt dump. I extracted the bin from the cap file and modified it, not sure if it's correct. also didnt work.... -
Hi
I was working all day on a 42" with no backlight = Driver is bad . LED Tester. Image exists
As I was reassembling, I discovered faults on the screen ( used the LED Tester to power the strips).
Right distribution board, 2 Flexs, near them:
The one near the center has 1" line on screen. Pressing on the board-side or Panel side of the Flex bonding place results in some change, I sensed heating one time, but main fault line remains
The other, pressing on the Panel to the Chassey and the lines disappears 99.99%
I...
Comment