[B]HP Zbook 15 G4 LA-E161P[/B]
Original bios dumps from OEM.
Tested working.
After first boot you need to wait for PC update bios (Do not turn off)[B]HP Zbook 15 G4 LA-E161P[/B]
Original bios dumps from OEM.
Tested working.
After first boot you need to wait for PC update bios (Do not turn off)...
sn4k3
Senior Member
Last Activity: 04-10-2025, 11:38 AM
Joined: 10-07-2016
Location: Alvito
-
[B]ZBook 15 G3[/B]
Original bios dumps from OEM.
Tested working.
After first boot you need to wait for PC update bios (Do not turn off)[B]ZBook 15 G3[/B]
Original bios dumps from OEM.
Tested working.
After first boot you need to wait for PC update bios (Do not turn off)...Leave a comment:
-
Re: Eeprom dump thread!
Looking for:
Mark: Silver
Model: IP-LE32/495523
Chassis (main board, components): TP.MS3663S.PB818
LCD Screen/Panel (if exist): D32-M30 32JP2006024000106701Leave a comment:
-
Re: Samsung NP300E5C-S01PT (BA41-01979A) Turn Off after some minutes [Motherboard]
Good to know, thanks for posting this.
In fact i "think" i upgraded the CPU, not sure now, but i renember i cleared the ME region. After all i replaced motherboard which worked...Last edited by SMDFlea; 05-07-2023, 08:24 AM.Leave a comment:
-
Re: Sony Vaio VPCEB MBX-224 no image but backlight and hdmi works
That's true, but problem with GPUs these days are not the balls most of the times. A reflow and/or reball can fix broken or bad contact with pad/ball joint but we know GPUs goes bad internally and heat expand circuit remove shorts sometimes. Also we can't reball the micro balls from DIE.
In other hand is hard to find brand new GPU's, they will be used and refurbished most of the times on china market (ali, ebay) so don't seens a great solution either. So my preference is reflow first, if it...Leave a comment:
-
Re: Sony Vaio VPCEB MBX-224 no image but backlight and hdmi works
I know reflow is temporary fix, permanent GPU repair require a new gpu solder in. But this will do for the purpose of this old laptop. Regards...Leave a comment:
-
Re: Sony Vaio VPCEB MBX-224 no image but backlight and hdmi works
Fixed with reflow, it now have image and works normaly. ThanksLeave a comment:
-
Re: Sony Vaio VPCEB MBX-224 no image but backlight and hdmi works
I measure in diode mode, the lines are all +/- 0.478V and others 0.481V (With and without LCD connected, values are the same)Last edited by sn4k3; 04-23-2019, 09:48 PM.Leave a comment:
-
Re: Sony Vaio VPCEB MBX-224 no image but backlight and hdmi works
black background. No damage, i have 3 LCDs with same model and try them all.
Diode mode but with PC off in both stages right?...Leave a comment:
-
Sony Vaio VPCEB MBX-224 no image but backlight and hdmi works
I have a Sony Vaio VPCEB4Z1E MBX-224, it suddenly stop outputing image to LCD, backlight always works. Tried external monitor and is ok, both VGA and HDMI is able to output image to the external monitor, but internal still without image. Then i buy a new panel but the problem presist. Since i have another equal pc layarround i tried to replace LVDS cable, nothing changed.
After looking schemantics i probe TP's on lcd connector with PC ON, every TP shows voltage.
LCDVCC: 3.3V
ATI lines: 1.2V
INV_: 3.3V
DCBATOUT: 19V
What... -
Re: Toshiba satellite l50-b-25w
Thank you!
Do you know the function of this chip? And if PC should boot without it?...Leave a comment:
-
Re: Toshiba satellite l50-b-25w
Anyone have the ROM backup for 24C08WP?
Someone removed this chip from MB and i need to write one from blank...Leave a comment:
-
Re: Samsung UE40D5003BW show logo and turn off itself
I've checked, it's always fixed, no fluctuations, both 13v and 5v fixed, no changes when it turn off
No, but is possible, bottom side is a bit darker on CPU side, i have SEMS20 on stock, if all other tries fail that will be my last guess and solder a new on.
Does your also start misfunction with other stuff too? Mine as audio...Last edited by sn4k3; 01-11-2019, 07:12 PM.Leave a comment:
-
Re: Samsung UE40D5003BW show logo and turn off itself
I don't know, that board was been there for years and match plastic holes. Maybe because i don't place every screw it seen wrong to you.
Red blinks here: [url]https://www.youtube.com/watch?v=MB6XsYz_gfw&feature=youtu.be[/url]
I didn't get the bold part, what you refer to?Re: Samsung UE40D5003BW show logo an...'t place every...Leave a comment:
-
Samsung UE40D5003BW show logo and turn off itself
Brand: Samsung
Model: UE40D5003BW, UE40D5003BWXXC
Chassis: BN41-01702A
Panel: LD40BGD-V1
Before this samsung started to lose sound itself, then it start to boot loop with samsung logo and now only turn on, show SAMSUNG logo and after some seconds it turn off, standby LED blink RED at start and then stay red all the time.
Remote doesn't respond and i can't turn off/on again, it got stuck on that phase.
Backlight is always on, but when samsung logo is gone the backlight go dimmer, still visible from the back.
Things i've tried:
...Last edited by sn4k3; 01-08-2019, 01:22 PM. -
Re: Eeprom dump thread!
Brand: Samsung
Model: UE40D5003BW, UE40D5003BWXXC
Chassis: BN94-04940R, BN41-01702A
Panel: LTJ400HM05-J, LD40BGD-V1...Leave a comment:
-
Re: Eeprom dump thread!
MODEL: 32/173I-GB-4B-hbkup-eu
MODEL: b32fa173bk
PRODUCT CODE: BW32O173BBKPE421
MAINBOARD: T.MSD309.9b 10345
PANEL: LTA320AN12
TUNER: XDTT-6F1C/T1146...Leave a comment:
-
Re: Eeprom dump thread!
Someone send me the file
here is:
Blaupunkt 40/148i-GB-5B-FHBKUP-EU
Chassis: TP.MSD309.BP85
Model: B40A148TCFHD
Product code: BA40I148BFBKPE061
Label on LED screen:
Model: 0040CA001
LSC400HM06
Note: The rom from previous post (133i) works after a day of test...Leave a comment:
-
Re: Eeprom dump thread!
Hello, anyone have the dump for:
Blaupunkt 40/148i-GB-5B-FHBKUP-EU
Chassis: TP.MSD309.BP85
Model: B40A148TCFHD
Product code: BA40I148BFBKPE061
Label on LED screen:
Model: 0040CA001
LSC400HM06
Regards
[b]EDIT:[/b]
While searching and try out multiple ROMs i find one compatible with the model:
[code]40/133I-WB-5B-FHBKUP-EU
B40A133TCFHD
BS40I133BFBKPE061
MATRYCA LSC400HM06
PG TP.MSD309.BP85
PAMIĘĆ...Last edited by sn4k3; 07-17-2018, 03:13 PM.Leave a comment:
-
Re: TV Image with ghost colors and artifacts
Thats bad news
What you repair people do when the problem is the panel? It is worth to get a new one to repair? I ask because the screens cost alot, sometimes more than the TV...Leave a comment:
No activity results to display
Leave a comment: