Badcaps - Explore our electronics repair forums

Collapse
 
  • Time
  • Answered
  • Show
  • New Topics
Clear All
new posts

  • DELL Latitude 5300 wheres Waldo.. i mean BIOS chip

    Hi!
    I have BIOS locked by admin password in laptop Dell Latitude 5300. I already disasembled laptop and i can't find BIOS chip. Can someone help? I attached motherboard pictures....
    See more | Go to post

  • Looking for a schematic, boardview, for a board GA-RX7PXE4 REV: 1.2

    Hello looking for a schematic, boardview, for a board GA-RX7PXE4 REV: 1.2. A laptop gigabyte aorus 17 xe4. A part has burned down, please help us identify it. Photo attached
    See more | Go to post

  • HP PROBOOK 450 G1 - LED flashing on the charging connector

    Please, someone who can help me with a PROBOOK 450 G1. When I connect the charger or power supply, the power jack LED starts blinking. The board has the main voltages: 19V, 3V, 5V, and 3V, and the power button.
    The board turns on.
    This is the board model: Rampage_MB 12241-1
    See more | Go to post

  • Lenovo P14s Gen 2 Rev 2.0 BIOS Unlock

    Hi, been trying to find a way to unlock my Lenovo ThinkPad P14s Gen 2 bios. If anyone could help that would be great.

    Model: 20VX-006YUK
    Serial Number PF-3J90R4
    NM-D352 Rev 2.0
    i7-1165G7
    Nvidia T500

    Any other info please ask....
    See more | Go to post

  • Nokia HN24GE320C - emmc

    Hi .I'm looking a correct pins to connect via isp in EL.MT9216-FG48 chassis .I'm trying to connect with Z3X and UFPI with pins from simmilar chassis , but D0 not correct . I don't want to brake this chassis .Anyone help me with correct pins ?
    See more | Go to post

  • i need eMMC Dump for Sony KDL-55W805C

    Hello everyone,

    The TV won't turn on (no power, no LED,). All voltages are present on the motherboard. The CPU is working and is getting warm.

    This is a common issue with this model. If the eMMC is faulty, the TV will either go into a reboot loop or not turn on at all.

    does anyone have the EMMC dump file?


    Model: Sony KDL-55W805C
    Mainboard: 1-980-805-31
    EMMC: SK HYNIX H26M52103FMR
    Display-Panel: T550HVF06.0
    See more | Go to post

  • lenovo IDEAPAD 3 16ITL6 HS460 HS560 HS760 NM-D471 bios problem

    Hello friends,
    On this motherboard, there is a broken connection between the RAM slot and the CPU.
    However, it works fine with onboard RAM only — everything runs well.

    The problem is: when I shut down Windows, the screen goes black but the system keeps running.
    I have to power it off manually using the on/off button.
    When I turn it back on, it works normally again.

    I’ve tried many BIOS files from forums and other sources, but only the original BIOS works correctly.

    I would like to thank in advance any friend who can help me patch...
    See more | Go to post

  • tktrom
    started a topic Predator Helios Neo 16

    Predator Helios Neo 16

    Good afternoon, I have this machine and I can't install Sense. When I run the software, the message "This model is not compatible" appears. I've read that this is because the model name in the BIOS says:
    PHN16-72-99PA.
    It should say:
    PREDATOR PHN16-72-99PA
    Could someone help me change the model in the BIOS or tell me how to do it?
    Thank you very much in advance.
    Model: PHN16-72-99PA
    S/N: NHQQXAA002404031193400...
    See more | Go to post

  • Sonos Play 1 pulsing power supply

    I'm rather new to repairing electronics, i do know the basics of most components but never actually repaired a PCB, but i want to change that.
    So, i bought a faulty Sonos Play 1 speaker with the intention of finding the fault, and replace the damaged part.
    Well, i did find the fault, i replaced parts that i thought caused the problem, but no-go.

    The problem is a pulsing power supply, when i connect the mains to the board and hook up my thermal cam i see R306,307 and 308 getting warm, but i assume that's normal.
    But, whats is not normal is the pulsing of resistor...
    See more | Go to post

  • Dell Optiplex 7490 AIO - red power led after flash

    Hi guys,

    This is my first post! 🚀
    I have no idea what I’m doing, but I’m learning by trial and error.

    I’m currently working on a Dell Optiplex AIO 7490—one of a bunch of AIOs that mysteriously failed to POST just a few days after the warranty expired. The original issue was that the PC worked fine until it was rebooted, after which it got stuck on a black screen (no backlight), with fans spinning at normal speed and a solid white power LED. Forcing it off by holding the power button would just cause it to switch on automatically and get stuck again on...
    See more | Go to post
No content found
Show More
 
  • Time
  • Show
  • New Topics
Clear All
new posts
Please log in to your account to view your subscribed posts.

What's Going On

Collapse

There are currently 458130 users online. 4318 members and 453812 guests.

Most users ever online was 1,342,976 at 10:51 PM on 04-26-2024.

Badcaps Statistics

Collapse

Topics: 221,305   Posts: 1,510,161   Members: 588,855   Active Members: 21,494
Welcome to our newest member, wasdasd0616.

Forums

Collapse

Top Active Users

Collapse

Today's Birthdays

Collapse

Latest Topics from Friends

Collapse

There are no results that meet this criteria.

Working...