Need CPU Cooler Advice

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Maxxarcade
    Badcaps Veteran
    • Jul 2006
    • 973

    #1

    Need CPU Cooler Advice

    I have a Phenom II X4 955, and the stock cooler is too loud for me.

    I have the Noctua NH-U9B SE2 in mind as a replacement, But I don't think it will clear my RAM. My motherboard is a Gigabyte GA-MA790X-UD4P, and I have all 4 slots filled with Mushkin RAM that has heatsinks.

    Any of you guys know of a cooler that would work without too much hacking?

    Attached Files
  • stj
    Great Sage 齊天大聖
    • Dec 2009
    • 30910
    • Albion

    #2
    Re: Need CPU Cooler Advice

    fit a flange and a 120mm fan with higher cfm but lower rpm.

    a lot of modding sites sell 70-80, and 80-120 / 92-120 adapter flanges.

    Comment

    • ratdude747
      Black Sheep
      • Nov 2008
      • 17136
      • USA

      #3
      Re: Need CPU Cooler Advice

      my ex-friend had a spin q on his phenom II. he was happy with it. it oc'd really well. quiet, too.
      sigpic

      (Insert witty quote here)

      Comment

      • shadow
        Badcaps Veteran
        • Feb 2007
        • 732
        • Australia

        #4
        Re: Need CPU Cooler Advice

        You may be lucky with the Noctua...I was! I had roughly 2mm gap between RAM heatsink and CPU cooler.

        Comment

        • washu
          Badcaps Veteran
          • Jul 2009
          • 310

          #5
          Re: Need CPU Cooler Advice

          Anything by Scythe should work fine and be much quieter. I have a Kama Angle and my ram has heat sinks and they don't interfere. Make sure you get one with a PWM fan so that it will be quieter while your CPU is idle.

          Comment

          • Maxxarcade
            Badcaps Veteran
            • Jul 2006
            • 973

            #6
            Re: Need CPU Cooler Advice

            Originally posted by stj
            fit a flange and a 120mm fan with higher cfm but lower rpm.

            a lot of modding sites sell 70-80, and 80-120 / 92-120 adapter flanges.
            I would love to do that, but it looks like the fan clips into this heatsink by using a plastic bracket. None of the flanges I found would fit

            Comment

            • Scenic
              o.O
              • Sep 2007
              • 2640
              • Germany

              #7
              Re: Need CPU Cooler Advice

              i'm kinda happy with my Arctic Freezer 7 Pro (Freezer 64 Pro is the AMD version).
              keeps my overclocked Quadcore (C2Q Q6600 @ 3,2) quite cool for not being as big as a shoebox..
              pretty quiet too (PWM controlled via mainboard)

              the intel version comes with pushpins () but i got that sorted out with the scythe 775 CPU Cooler stabilizer kit (out with the pushpins, in with the backplate and screwed-down cooler )

              Comment

              • 370forlife
                Large Marge
                • Aug 2008
                • 3112
                • United States

                #8
                Re: Need CPU Cooler Advice

                http://www.newegg.com/Product/Produc...82E16835200038

                I know, I know, rosewill, but it's actually pretty good. Mine with a 5000+ stays at 25C idle, 28-29C full blast. Room temp is roughly 25C. Just don't use the supplied thermal paste, it's not that good. They also tell you to use 1/2 of the syringe, and there's a lot more in it than in the picture. It's pretty liquidy. With your motherboard it would either have the fan facing up or down, not towards the rear fan. Most coolers like this will do that though.

                Comment

                • Maxxarcade
                  Badcaps Veteran
                  • Jul 2006
                  • 973

                  #9
                  Re: Need CPU Cooler Advice

                  Originally posted by 370forlife
                  http://www.newegg.com/Product/Produc...82E16835200038

                  I know, I know, rosewill, but it's actually pretty good. Mine with a 5000+ stays at 25C idle, 28-29C full blast. Room temp is roughly 25C. Just don't use the supplied thermal paste, it's not that good. They also tell you to use 1/2 of the syringe, and there's a lot more in it than in the picture. It's pretty liquidy. With your motherboard it would either have the fan facing up or down, not towards the rear fan. Most coolers like this will do that though.
                  I might give this one a try, since other people have apparently used it on my board. It also appears to be taller, so it shouldn't have any RAM clearance issues.

                  Comment

                  • Maxxarcade
                    Badcaps Veteran
                    • Jul 2006
                    • 973

                    #10
                    Re: Need CPU Cooler Advice

                    I just noticed something odd. According to the hardware monitor, both my case and CPU temp are about 49 degrees. How could the CPU be anywhere near ambient temp with the stock cooler? It has to be wrong, because the CPU fan slows down when I remove the side cover from the case.

                    I have a hot fanless Geforce 9600GT, which is probably why my case temp is so high.

                    Comment

                    • Wizard
                      Badcaps Legend
                      • Mar 2008
                      • 2296

                      #11
                      Re: Need CPU Cooler Advice

                      Maxxarcade,

                      This is normal for all *aluminum* heatsink. Poor conduction. If you have heat pipe with copper bottom heatsink, the temp lowers by 5 to 8C. That can be significent.

                      Back in the day when melting athlon CPUs was the vogue, I had to search hard and long to find alpha heatsinks, paid petty price for them but WORTH the trouble.

                      Cheers, Wizard

                      Comment

                      • 370forlife
                        Large Marge
                        • Aug 2008
                        • 3112
                        • United States

                        #12
                        Re: Need CPU Cooler Advice

                        Looks like his is the smaller heatpipe heatsink AMD provides with their higher end processors.

                        Comment

                        • Maxxarcade
                          Badcaps Veteran
                          • Jul 2006
                          • 973

                          #13
                          Re: Need CPU Cooler Advice

                          Originally posted by 370forlife
                          Looks like his is the smaller heatpipe heatsink AMD provides with their higher end processors.
                          It is indeed a heatpipe. I'm wondering if what I really need is better airflow through the case.

                          The case has 3 120mm fans running at 1000 RPM or so. There are 2 in the front with filters, and one in the back. Hardly any air goes through them, considering the size.

                          Comment

                          • Wizard
                            Badcaps Legend
                            • Mar 2008
                            • 2296

                            #14
                            Re: Need CPU Cooler Advice

                            What kind of this heatsink? This size of heatsink as shown does not qualify as good one even with heat pipe, it looked like it has no copper bottom either and blows down on CPU performs poorly. I tend to go for much larger heatsink. Tower actually with number of heatpipes with fins blown thru sideways towards tower case's back. There are good ones that is not so wide yet good cooling and quiet.

                            I even don't have many fans either and I like quiet.

                            Cheers, Wizard

                            Comment

                            • Maxxarcade
                              Badcaps Veteran
                              • Jul 2006
                              • 973

                              #15
                              Re: Need CPU Cooler Advice

                              Originally posted by Wizard
                              What kind of this heatsink? This size of heatsink as shown does not qualify as good one even with heat pipe, it looked like it has no copper bottom either and blows down on CPU performs poorly. I tend to go for much larger heatsink. Tower actually with number of heatpipes with fins blown thru sideways towards tower case's back. There are good ones that is not so wide yet good cooling and quiet.

                              I even don't have many fans either and I like quiet.

                              Cheers, Wizard
                              Are you referring to the stock cooler, or the Rosewill one?

                              The stock one does have a copper base if I recall, but it is too small and has poor airflow.

                              Do you have any recommendations for something that will fit, and still be able to clear my RAM chips?

                              Comment

                              • Wizard
                                Badcaps Legend
                                • Mar 2008
                                • 2296

                                #16
                                Re: Need CPU Cooler Advice

                                Down blown heatsink is Rosewill?

                                Cheers, Wizard

                                Comment

                                • Maxxarcade
                                  Badcaps Veteran
                                  • Jul 2006
                                  • 973

                                  #17
                                  Re: Need CPU Cooler Advice

                                  Originally posted by Wizard
                                  Down blown heatsink is Rosewill?

                                  Cheers, Wizard
                                  The one in the picture is the stock one, which I am currently using. That is the one I referred to as the down flow.

                                  The Rosewill would blow down towards the video card or up to the PSU, depending on which direction I install it.

                                  Comment

                                  • Wizard
                                    Badcaps Legend
                                    • Mar 2008
                                    • 2296

                                    #18
                                    Re: Need CPU Cooler Advice

                                    Prefered tower cooler is blown to the rear towards rear of case. Get another heatsink.

                                    Cheers, Wizard

                                    Comment

                                    • Maxxarcade
                                      Badcaps Veteran
                                      • Jul 2006
                                      • 973

                                      #19
                                      Re: Need CPU Cooler Advice

                                      Originally posted by Wizard
                                      Prefered tower cooler is blown to the rear towards rear of case. Get another heatsink.

                                      Cheers, Wizard
                                      I haven't been able to find any AMD ones that blow to the rear. Probably because of how the mounting holes are spaced for the AM2 platform.

                                      Comment

                                      • Wizard
                                        Badcaps Legend
                                        • Mar 2008
                                        • 2296

                                        #20
                                        Re: Need CPU Cooler Advice

                                        There are some that have you mount the heatsink while out of case. Keep looking.

                                        Some reqires taking off AM2/AM3 bracket and installed directly thru the holes with reinforced plate on back of mainboard.

                                        Cheers, Wizard

                                        Comment

                                        Related Topics

                                        Collapse

                                        • BleedCap
                                          OLD Socket 478 custom bracket + NEW generic cooler
                                          by BleedCap
                                          I already posted this on vogons.
                                          Its a 3d printed custom bracket for socket 478.
                                          I used this AM4 bracket as a base design.
                                          Its to be use with cheap generic clip based cpu cooler.

                                          Reason for doing this is:
                                          - Its hard to get/find a good copper base cooler. Even if you find one, the price is ....
                                          - New generic cooler is cheaper and can use bigger fan (less noise)

                                          I tested the bracket with cheap chinese horizontal cooler + fan taken from CM hyper 212 evo.
                                          The processor that I was using is P4 2.4Ghz prescott....
                                          11-05-2023, 08:09 PM
                                        • Green Probe
                                          Mosfet Advice
                                          by Green Probe
                                          Hi, Im looking to replace some EMP21N03 mosfets on an Alienware motherboard, but I'm having trouble finding a legit supplier. The ones that are available from China have pictures with the engraved logo looking very scratchy and sketchy. Nobody in the US sells them. I'm trying to find a compatible mosfet, but I'm not well versed enough to be confident im making the right choice. Does anyone have a suggestion or advice that could help me find the right mosfet? Thanks!
                                          05-22-2025, 10:49 AM
                                        • user234
                                          Gigabyte Eagle 3060 Ti - Boardview / Advice request please
                                          by user234
                                          Hi all,

                                          Recently installed a new motherboard but during the process I seemed to have damaged my Gigabyte Eagle 3060 Ti card.

                                          My motherboard ROG STRIX B550-A is detecting an issue with the VGA (light ON)

                                          I have attached 2 photo's of my GPU board, one above and the other is what I believe to be the 5V - as you can see, this has visual damage so looks suspicious to me.

                                          If I replace this part what are the odds this will resolve the issue? - any additional information on where to source the parts would be much apricated too!

                                          This is...
                                          05-10-2025, 04:25 AM
                                        • edugimeno
                                          Wine cooler flickers at startup and doesn't cool enough
                                          by edugimeno
                                          Hi there!
                                          I have an old wine bottle cooler, it's a basic peltier cell system with a power supply built in with the controller board, with a simple display at the front door and 2 push buttons to select the desired temperatura.
                                          Symptoms are it doesn't barely cool down, and makes a chirping noise at the board.
                                          Both fans on each side of the peltier are (now, after much cleaning) running smooth and silent
                                          When you turn it on, the front 7-segment display flickers for a variable time, usually like 1 minute but sometimes nothing or 3 minutes... Then turn on solid (but still some...
                                          03-01-2025, 04:51 AM
                                        • artvandalai
                                          Advice on rewiring this stepup transformer?
                                          by artvandalai
                                          I bought this Chinese made step up transformer to run some 220v appliances. Some of the wires were brittle and broke off. I attempted to improve some of the wiring with spade terminals and heatshrink tubing as the wires were just soldered straight to the connectors. Any advice on how to rewire the broken wires on this step up transformer? I'm unsure how to go about rewiring this to a better safe working condition.
                                          01-14-2025, 01:00 AM
                                        • Loading...
                                        • No more items.
                                        Working...