Hi
I need to know when we must program the i/o
And which programmer is the best
Thanks
I need to know when we must program the i/o
And which programmer is the best
Thanks
-
-
Re: I/o
What do you have -
Re: I/o
I'm sorry could you be more vague? I almost understood a little bit of that
are you talking about PIO mode? an actual application? bios flasher?Cap Datasheet Depot: http://www.paullinebarger.net/DS/
^If you have datasheets not listed PM meComment
-
Hello guys. What programmer can I use to program the EC IT8886HE? I have the TL-866II PLUS but it is not in the library, nor is any of the ITE family.
-
Greetings badcaps community,
I havent done this for a long time and want to start it all again, after some evil and annyoing illness.
So I apologize in advance, if some phrases might sound a bit like gibberish or illogical to you.
Im trying my best to fully describe what I plan to achieve and hope I was choosing the right sub-forum for my new adventure.
I have a Elitebook 820 G1 and a Elitebook 840 G2 here.
These ask for a password when entering the BIOS, but boot just fine from the internal SSD.
I learned that desoldering...10-29-2024, 06:03 AM -
Hi I want to read/program the KBC file off IT8519E. Does anyone know how to do this. I have physically removed the IT8519E chip from the motherboard & I have soldered it on the addon programmable card to program on the RT809H. How will I do this? Do I have to apply 3.3 volt & ground externally from a bench power supply?? It will be great if someone can guide me, first time I will be doing this programming. Thanks -
Recently I've gotten into EC flashing due to my broken laptop(s) and started frantically searching methods for flashing the IT5571E-128 chip on the cheap(due to me beaing a student and not having a job) and noticed that ITE newer chips can be flashed via ISP (In-System Programming) either via SMBus or the KBC (EPP - Enhanced Parallel Port) interface. While these can be achieved with programmers like SVOD4/3 or the RT809H/F those options are WAYYY out of my budget so I was horrified. But recently I stumbled uppon some programmers on aliexpress that claim they can program a variety of ITE chips...06-17-2025, 07:17 AM -
Hi has anyone got the latest software for the TL866CS MiniPro EPROM programmer version 03.2.86 is installed now i have tried the update site in the programmer software but it wont connect to their website i am running windows 10
Edit found this site programmer works now http://www.xgecu.com/EN/Index.html
Comment