Re: best cheap/free scores 1.1
OK well to resurrect this thread - today for free I got a 3U rackmount server case with a 300W Antec PSU in it. The PSU had (of course) bulging and leaking Fuhjyyyyyyyyyyus in it, and since recapping it I've been searching for some hardware to put into it. I want to turn it into a NAS box or something. So here's my dilemma: I have 2 choices of what to put into it.
Option 1: This: http://cgi.ebay.com/Tyan-S1832DF-Dua...item1c0fb3816c
Option 2: My old P4 board - P4 2.0A, 768MB of PC133.
For either of them, I'm going to get a gigabit ethernet card, and a 4 port SATA RAID controller with a couple large drives to stick to it. Either way, a PCI bus is a PCI bus, so that's fine. I've read that 2 P3s beat out a P4 in terms of responsiveness and multithreading. For something like this, you want responsiveness, because the CPU shouldn't even be involved with bulk transfers over the PCI bus. What do you guys think? The dual p3 board is 40 dollars, and the p4 board is free. However, I could get the p3 board this week, and I wouldn't be able to get the p4 board for a few weeks. Another consideration - the power supply is older and heavy on the 5v/3.3v (30A each ish) and only 15A on the 12v, so a 5v based p3 board would make the power supply happier. They'd also use less overall power (2 x 20W vs 50W). I'm probably going to find some crappy old PATA drive to run FreeNAS from, and then use the big drives for storage.
I'm open to any and all suggestions Thanks!
OK well to resurrect this thread - today for free I got a 3U rackmount server case with a 300W Antec PSU in it. The PSU had (of course) bulging and leaking Fuhjyyyyyyyyyyus in it, and since recapping it I've been searching for some hardware to put into it. I want to turn it into a NAS box or something. So here's my dilemma: I have 2 choices of what to put into it.
Option 1: This: http://cgi.ebay.com/Tyan-S1832DF-Dua...item1c0fb3816c
Option 2: My old P4 board - P4 2.0A, 768MB of PC133.
For either of them, I'm going to get a gigabit ethernet card, and a 4 port SATA RAID controller with a couple large drives to stick to it. Either way, a PCI bus is a PCI bus, so that's fine. I've read that 2 P3s beat out a P4 in terms of responsiveness and multithreading. For something like this, you want responsiveness, because the CPU shouldn't even be involved with bulk transfers over the PCI bus. What do you guys think? The dual p3 board is 40 dollars, and the p4 board is free. However, I could get the p3 board this week, and I wouldn't be able to get the p4 board for a few weeks. Another consideration - the power supply is older and heavy on the 5v/3.3v (30A each ish) and only 15A on the 12v, so a 5v based p3 board would make the power supply happier. They'd also use less overall power (2 x 20W vs 50W). I'm probably going to find some crappy old PATA drive to run FreeNAS from, and then use the big drives for storage.
I'm open to any and all suggestions Thanks!
Comment