Re: best cheap/free scores 1.1
I was given Precision M6300 # 4 today....this one would power up and run, but no video on the screen or on the DVI out....low & behold, it had a bad video board (quadro fx1600). Not sure if the underfill issue caused its demise, but it was bad for sure. I stuck the spare I had from the one I upgraded to the fx3600, and it runs great now.
I sold one the other day for $425....and 2 working ones left including the one billy badass one I took to the house....and I have one for parts. The one I sold more than covered what I spent on upgrades for the badass one, and it was a cash sale... 
							
						
					I was given Precision M6300 # 4 today....this one would power up and run, but no video on the screen or on the DVI out....low & behold, it had a bad video board (quadro fx1600). Not sure if the underfill issue caused its demise, but it was bad for sure. I stuck the spare I had from the one I upgraded to the fx3600, and it runs great now.
I sold one the other day for $425....and 2 working ones left including the one billy badass one I took to the house....and I have one for parts. The one I sold more than covered what I spent on upgrades for the badass one, and it was a cash sale...
 
							
						
 perfect for our servers!
 perfect for our servers!
							
						 . Upon pressing the PC power button, the card would buzz and would make the PSU turn off immediately. (At least now I know that the SCP/OCP on my 430W Thermaltake TR2 works very well - no burning wires).
 . Upon pressing the PC power button, the card would buzz and would make the PSU turn off immediately. (At least now I know that the SCP/OCP on my 430W Thermaltake TR2 works very well - no burning wires). - the upper MOSFET for GPU power was shorted. Not sure what rating it had cause I couldn't find any data sheets for it, but I replaced it with an 85A one, which is also slightly bigger (so most likely it's quite overspec-ed, but that's good). The card works great now
 - the upper MOSFET for GPU power was shorted. Not sure what rating it had cause I couldn't find any data sheets for it, but I replaced it with an 85A one, which is also slightly bigger (so most likely it's quite overspec-ed, but that's good). The card works great now  . Go figure.
 . Go figure.
							
						
Comment