Re: Geforce 6800gt VGA missing red output signal
Thanks, that's probably the one I'll order.
-
Re: Geforce 6800gt VGA missing red output signal
It might be one of these https://www.digikey.ca/products/en/f...=1&pageSize=25
If its on the vga output I doubt the value is that critical, anything around that size seems to be about 1µHLast edited by R_J; 03-27-2019, 10:43 PM.Leave a comment:
-
Geforce 6800gt VGA missing red output signal
I have a Geforce 6800gt that is not outputting any red signal to the analog VGA connector, and everything is a shade of cyan. The card otherwise works fine, and I'm pretty sure the problem is caused by a torn off inductor next to the VGA connector. In the photos I uploaded there are two inductors L512 and L515, but L511 is missing.
Anyone know what inductor I can use to replace the missing one? The two remaining ones are about 2.1mm long, 1.2mm wide and 1.2mm tall. They seem to have two connectors on each end. What would be a suitable replacement that I can buy?Attached Filesif you find these attachements useful please consider making a small donation to the site
-
-
NVIDIA GeForce RTX 3080 / RTX 3090 Schematic & Board View
The GeForce RTX 3080 is an enthusiast-class graphics card by NVIDIA, launched on September 1st, 2020. Built on the 8 nm process, and based on the GA102 graphics processor, in its GA102-200-KD-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 3080. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The GA102 graphics processor is a large chip with a die area of 628... -
Hey guys.
Need help with this one.
Fan not spinning due to missing PWN Fan signal.
Also 5 seconds from powering up it freezes, unless in BIOS.
But as soon as Windows starts to load, it will freeze.
CPU is COLD / Room temp when it freezes.
I've replaced the CPU, same problem.
Replaced SIO/KBC IT8987e and reprogrammed - same problem.
Replaced fan - same problem.
Replaced flex cable from board to daughterboard (which has fan connector on it) - same problem.
Checked the Thermal sensors around CPU and Board to the SIO/KBC and...08-19-2024, 05:22 PM -
NVIDIA GeForce RTX 2060 / RTX 2070 Schematic & Board View
The GeForce RTX 2060 is a performance-segment graphics card by NVIDIA, launched on January 7th, 2019. Built on the 12 nm process, and based on the TU106 graphics processor, in its TU106-200A-KA-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 2060. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The TU106 graphics processor is a large chip with a die area of 445... -
NVIDIA GeForce GTX 950 / GTX 960 Schematic & Board View
The GeForce GTX 950 was a mid-range graphics card by NVIDIA, launched on August 20th, 2015. Built on the 28 nm process, and based on the GM206 graphics processor, in its GM206-250-A1 variant, the card supports DirectX 12. This ensures that all modern games will run on GeForce GTX 950. The GM206 graphics processor is an average sized chip with a die area of 228 mm² and 2,940 million transistors. Unlike the fully unlocked GeForce GTX 960, which uses the same GPU but has all 1024 shaders enabled, NVIDIA has disabled some shading...10-01-2024, 01:54 PM -
Hi everyone,
I recently acquired this card from a seller who was selling a PowerMac G5 for parts. He mentioned that the video card was probably broken too.
Upon closer inspection, I can tell the reason why it won't work: it's missing a bunch of CAPS! (it's also missing an inductor - 1.0uH).
It's a nice card as it's one of the few AGP cards that will support 2560 x 1600 resolution on a PowerMac G5 using a 30" Cinema Display.
Looking at the card, it appears to be missing the following:
1x 1.0uH inductor - orange square
2x...
Leave a comment: