It's been a few years, but I remember reading how you could mod two Athlon XP CPU's and use them in a board design for MP's. Does anyone know hope to do this?
-
-
Re: Ahtlon XP in Dual MP board?
You have to short an L bridge on Athlon pcb so the motherboard recognizes it as a Athlon MP cpu: the exact bridge depends on Athlon core revision. I think it's better explained on Cpumsr tricks page and Fab51.
If you wants to have two cpus running, then be sure they're identical - same core, same frequency. Same revision isn't strictly required but may help avoid exceptional issues turning into lockups.
ZandraxHave an happy life. -
Re: Ahtlon XP in Dual MP board?
google l bridge modding.
i did a bunch of it years back but a bit rusty now.
there are l bridge combinations to denote athlon,duron,mobile,mp,and a few other setups.Comment
-
Re: Ahtlon XP in Dual MP board?
Buy two semprons 3000+'s...
They are rebadged MP's...
If you put them in a Dual MP board they come up as MP1900+'s...
Better yet get two XP-M 3000+ processors and close the MP bridge...
16.5x133.33 goodness!Ya'll think us folk from the country's real funny-like, dontcha?
The opinions expressed above do not represent those of BADCAPS.NET or any of their affiliates.Comment
-
Re: Ahtlon XP in Dual MP board?
I already have two 1600+'s. It's odd because I found the second one in a curbside computer after a flood. It works and all that thou! =D
Thanks you all for the replies also.Comment
-
Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.
Upon bringing it home and plugging it up, it showed a standby light.
I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.
The screen seems to blackout and stay black, but with a flashlight I can see the display.
With my Playstation 4 connected via HDMI, and running a game I can hear sound.
Assuming... -
Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic... -
All left and right refers to looking from rear of TV (or looking from front with TV upside down)- TV came with vertical bars and no image. Found faulty TVS on left buffer board. Also replaced T-Con (may have damaged the original while hot air removing components, board has slight warp) and have full image but few horizontal lines on the screen. Some of the lines appears to be 2 pixel tall while others are 1 pixel tall.
- Disconnecting left and right buffer board potentially reveals problems on both sides with different signals (unless this T-Con require jumper like Samsung FB_TRDY1&3) Fault
-
Hi There,
This TV was auto switching off after few seconds with some vertical lines on the screen, so got a new TCON board and replaced it.
After replacing the TCON board it was working fine and i set it up with everything, used for few hours, then had the bright idea to update the software on it. During the update process, TV switched off and now no audio or video. No relay switch sound.
More Details
TV Model - LG OLED77G1PUA
Got the same exact TCON board from TVPartsToday and replaced it. But didnt transfer the EPPROM data (didnt... -
Hi everyone,
I am trying to fix a samsung washinmachine power supply main board.
I already replaced it with another one to fix the machine but i want to try understand the issue with the old board.
Therefore i hope to be able to get some help to explain what to check in order to troubleshoot.
The power supply board reference is the following: DC41-00189a
I have followed one thread (https://www.badcaps.net/forum/troubl...ingmachine-rel...
Comment