Newegg.com Site Problems

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ncovert
    Badcaps Veteran
    • Feb 2011
    • 291
    • USA
    #1

    Newegg.com Site Problems

    When I try to visit newegg.com, I get this:
    "Thank you for visiting newegg.com. We are truly sorry for any inconvenience but we are currently experiencing problems on our server. Please try again at a later time.

    If you have any questions, please contact us and our helpful staff will alleviate any concerns you may have. errorcode: 2 "

    What does this mean? I haven't been able to browse the site for nearly 24 hours and I want to look at stuff (I haven't bought from them yet). Once I can get back on, I will give them alot of grief since they gave me so much!!

    Newegg.com on the left, me on the right on the emoticon.
    Tags: None
    • acstech
      GrumpyModerator
      • Jul 2007
      • 1432
      • USA
      #2
      Re: Newegg.com Site Problems

      Works fine for me. Could it be something on your end that's doing it?
      A man convinced against his will is of the same opinion still.

        Comment

        • shovenose
          Send Doge Memes
          • Aug 2010
          • 6575
          • USA
          #3
          Re: Newegg.com Site Problems

          seems fine to me...
          possible they transferred to a new server but your ISP still cached the old one's IP address?

            Comment

            • ncovert
              Badcaps Veteran
              • Feb 2011
              • 291
              • USA
              #4
              Re: Newegg.com Site Problems

              I seem to get it after browsing for a couple hours

                Comment

                Previous template Next

                Related Topics

                Collapse
                • jean luc ferre
                  laptop hp g72 b52sf screen problems
                  by jean luc ferre
                  Hello,
                  on this laptop hp g72 b52sf i have screen problems as you can see with the photo joined in attachments.
                  the used graphic card is "intel hd graphics" and the id of the integrated screen is : "monitor/SEC3354".
                  i verified the driver of the péripherals and they are ok. i verified the definition and settings of the graphic card and of the screen : definition 1600x900 and refreshment frequency :60hz. (they are the sames for the graphic card and the screen).
                  i don't understand the reasons of the white stripe at the bottom of the screen below the task...
                  06-07-2025, 03:27 PM
                • Hondaman
                  USB problems?
                  by Hondaman
                  Recently I discovered my SSD died (OCZ/Toshiba 240 GB). It was in a USB enclosure, attached to the Linksys WRT-AC1200 router. Since then I removed the USB enclosure and attached it to my Win7 PC (AMD 8150 CPU, 970 chipset, 64 GB RAM). I also gathered one or two other USB enclosures to figure out what is going on.

                  (I suspect that I lost quite a few MP3 and FLAC files I recently ripped from my audio CDs, I think I lost very little un-replaceable stuff.)

                  I think it is IMPOSSIBLE for Win7 to have any problems with a USB enclosure as long as Win7 knows how to speak to the...
                  08-12-2024, 03:26 PM
                • clabr
                  Lenovo 11e problems (any sata hdds are not recognized, sleep battery drain)
                  by clabr
                  Need help to solve some problems with this laptop.

                  After working in bed with it one night and heating up too much (probably the cause of this problems) the sata HDD OS windows froze
                  After restart the original Sata HDD was not recognized anymore (but works fine in other laptops or PCs)

                  Tried connecting other good Sata 2.5 HDDs but not one is working in this laptop anymore (not the original nor others)

                  Before this had happened I observed some other problems:
                  When I tried replacing original mecanical HDD with a SSD HDD could not get them...
                  12-02-2021, 08:09 AM
                • ohren
                  What problems could this blown cap cause in a Marantz SR5400?
                  by ohren
                  I'm looking at a vented C513 in a Marantz SR5400 (photo included), in the FR section on page 24 in the service manual (https://audiocircuit.dk/downloads/ma...400-avr-sm.pdf).

                  R533 right below it in the photo is charred, but measures the correct value.

                  1. I'm not familiar with amplifier circuits (at all — don't know the difference between classes, etc.) so I was wondering what problems would manifest from a supposedly non-operational C513? I didn't hear anything odd when testing the output channel with a speaker. Is there a simple test that can be done...
                  c513 r533
                  1 Photo
                  10-21-2025, 09:02 AM
                • jean luc ferre
                  display screen problems after changing motherboard
                  by jean luc ferre
                  Hello,
                  First on my laptop i had a motherboard with a pentium 6100 processor. Installing w11 i was blocked on the 23h2 version...impossibility to upgrade toward 24h2 because the SSE4.2 functionnality of the cpu was missing. About displaying and screen looking all was perfect.
                  I changed of motherboard with an intel I3 processor...and now i don't find the previous aspects of the displaying.
                  Now i have a veiled screen and pixels are missing though the graphics parameters have not changed.
                  Desinstalling and reloading the drivers in the same time on the graphic card (intel hd...
                  09-11-2025, 10:28 AM
                • Loading...
                • No more items.
                Working...