Re: ACPI Controller
Nice thought, but price of Chipquik is extortionate in Australia (last time I looked, anyway)
Nice thought, but price of Chipquik is extortionate in Australia (last time I looked, anyway)
-
Last edited by pfrcom; 07-06-2011, 10:19 PM.better to keep quiet and be thought a fool, than to open your mouth and remove all doubt -
Re: ACPI Controller
There would one person in the world that stuff would not work for and that's me.
$28 bucks packet does 8-10 chips
939 DualCore AMD Opteron, 1800 MHz (9 x 200)
Abit AN8 / Fatal1ty AN8 SLI Series
3072 MB (PC3200 DDR SDRAM)
ATI Radeon HD 4300/4500 Series (1024 MB
Lian LI Aluminium mesh caseComment
-
Re: ACPI Controller
chipquik is WORTH in money alone, good profit making. Saved so much effort many times. Just 2mm to 3mm chunk is enough to do a typical IC up to 100 pins.
Cheers, WizardComment
-
Re: ACPI Controller
With hot air I can have that PLCC32 chip off in 30 seconds. I can test to ensure the contents is not damaged and put it back on in another minute. A dremel is far below the useful line here.Comment
-
Re: ACPI Controller
ACPI is power management do not confuse this with ACHI they are not the same. Go into the bios and turn off all power management/standby settings.Comment
-
Re: ACPI Controller
severach you sound as if you have some nice hot air kit
If you dont mind what is it?
939 DualCore AMD Opteron, 1800 MHz (9 x 200)
Abit AN8 / Fatal1ty AN8 SLI Series
3072 MB (PC3200 DDR SDRAM)
ATI Radeon HD 4300/4500 Series (1024 MB
Lian LI Aluminium mesh caseComment
-
Re: ACPI Controller
Next time i run the board I will put up a photo of the power bios page, I cant find any reference to disabling ACPI
939 DualCore AMD Opteron, 1800 MHz (9 x 200)
Abit AN8 / Fatal1ty AN8 SLI Series
3072 MB (PC3200 DDR SDRAM)
ATI Radeon HD 4300/4500 Series (1024 MB
Lian LI Aluminium mesh caseComment
-
Re: ACPI Controller
Kiddznet,
You won't and end up in frustration. What I suggest is open up the hardware property then device manager. Open the item that has yellow icon (!) that has ACPI item and go to: details tab, write down the first string, ignore the rest of gibberish. Google with this to find out what it is for, then download driver from the maker's site for that computer and direct & detect downloaded driver. This what I did several times to several computers.
Cheers, WizardComment
-
Re: ACPI Controller
Kiddznet,
You won't and end up in frustration. What I suggest is open up the hardware property then device manager. Open the item that has yellow icon (!) that has ACPI item and go to: details tab, write down the first string, ignore the rest of gibberish. Google with this to find out what it is for, then download driver from the maker's site for that computer. Direct computer's (!) to reinstall driver from specified folder & detect downloaded driver. This that I did several times to several computers.
Cheers, WizardComment
-
Re: ACPI Controller
Wizard,
No point in suggesting Windows settings - his board doesn't get as far as booting anythingbetter to keep quiet and be thought a fool, than to open your mouth and remove all doubtComment
-
Re: ACPI Controller
Slaps my forehead. Oooh. Okay, that sounds like bios eeprom is corrupt otherwise board is junk.
Cheers, WizardComment
-
Re: ACPI Controller
Have ripped off PLCC32 and replaced it with a socket whle I await another programmed chip to arrive
Er...does anyone forsee any problems with this?Last edited by kiddznet; 07-09-2011, 02:52 PM.
939 DualCore AMD Opteron, 1800 MHz (9 x 200)
Abit AN8 / Fatal1ty AN8 SLI Series
3072 MB (PC3200 DDR SDRAM)
ATI Radeon HD 4300/4500 Series (1024 MB
Lian LI Aluminium mesh caseComment
-
Re: ACPI Controller
Only that it introduces another variable, if the replacement chip doesn't work
If you still have the remains of the old chip, I suggest removing its AMI sticker and making a note of what the chip itself was, in case of compatibility problems
Or did the replacement chip vendor ask for those details ? (I'd be more confident of their ability, if they did)better to keep quiet and be thought a fool, than to open your mouth and remove all doubtComment
-
Re: ACPI Controller
Selling price is usually geared to what the market will bear, rather than the cost of production and logistics
As an aside, there's a political campaign going on in Australia now, with vested interests representing the big local retailers trying to persuade the government to introduce taxes, to make it less attractive for Australians to buy via the Internet
That would inevitably introduce yet another layer of bureaucracy, which ultimately has to be paid for by the consumerLast edited by pfrcom; 07-09-2011, 08:32 PM.better to keep quiet and be thought a fool, than to open your mouth and remove all doubtComment
-
Re: ACPI Controller
Ho hum... of course the board wont start at all now musta cooked the chip will wait until I get new chip.......
939 DualCore AMD Opteron, 1800 MHz (9 x 200)
Abit AN8 / Fatal1ty AN8 SLI Series
3072 MB (PC3200 DDR SDRAM)
ATI Radeon HD 4300/4500 Series (1024 MB
Lian LI Aluminium mesh caseComment
-
Comment
-
Re: ACPI Controller
And they vote for the current mob if you ever wondered who did.....That would inevitably introduce yet another layer of bureaucracy, which ultimately has to be paid for by the consumer
939 DualCore AMD Opteron, 1800 MHz (9 x 200)
Abit AN8 / Fatal1ty AN8 SLI Series
3072 MB (PC3200 DDR SDRAM)
ATI Radeon HD 4300/4500 Series (1024 MB
Lian LI Aluminium mesh caseComment
-
Re: ACPI Controller
Any update on this ? - have you got the new BIOS chip yet ?better to keep quiet and be thought a fool, than to open your mouth and remove all doubtComment
-
Re: ACPI Controller
Just use 2 soldering irons and somebody's help... I'm successfully unsolder PLCC chips with no damage to them.Comment
-
Compaq Presario SR1000 / SR1116FR, MSI MS-6577 (Xenon) Gamila/Giovani/Neon series
ACPI fix!
Yes, you read that right, the bug that HP/Compaq never fixed is finally no more, 16 years later. You probably don't care but here it is anyway.
Bug
Basically the bug is as follow: you want to use Linux on this machine, but it doesn't power off when you shut it down, you cannot put it to sleep, nouveau driver for NVidia GPUs doesn't load, etc…
At boot, you may be greeted by the following message:
...Code:[ 0.000000] ACPI Error: A valid RSDP was
11-30-2021, 02:34 PM -
I have an ASUS ROG Strix- G513IH-HN008, motherboard G513-6050A3249301- MB-A04 (A4)
When I received the device, the device has no function. After an investigation, I found that the PWM CONTROLLER RT6575B (U6100) is getting warm and there is a short circuit at the 3V3 output. This normally supplies 3V3 for the embedded controller IT5571E-128 (U301). When measuring and analyzing with a thermal imaging camera, I found that some components are damaged: SLG4E42553VTR (U8500), IT5571E-128 (U301), LAN RTL8111H (U450), LOGIC 74LVC1G08GW (U1900), RT6575B (U6100) All these components are on... -
The treadmill was working fine, one day the belt snapped and after checking the unit I also noticed that the display is now showing the Controller comm error. So I opened it up and the treadmill had two boards. One is a power supply board and the other is the motor controller. I noticed there was a mouse nest, so I took power supply board out, cleaned it up, replaced the big capacitor and that did nothing. Then I took apart the motor controller and cleaned that up, and when I plugged it in, it started right up. I thought I fixed it. But when the belt arrived, I installed it and tried to power... -
I recently bought a used tankless hot water heater and the controller board is completely dead no power up when power is applied the display board works however the main controller board does not work correctly at all the fuse is good
I bought a used replacement controller board that also had issues that I was able to fix and now the tankless water heater works correctly now
However I would like to know if I could figure what happened to this controller board if possible
Tomorrow I will take some better pictures of both side of both boards
The... -
This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors
I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using
I am comparing them to a brand new one that I installed
The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well
I going to let it run for several days before I remount back on the wall next to the...
Comment