Which diameter is this Hitachi capacitor?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Hitto
    Senior Member
    • Apr 2019
    • 95
    • Italy
    #1

    Which diameter is this Hitachi capacitor?

    I'm trying to determine the exact diameter of this Hitachi capacitor:


    It is a rather generic 85° capacitor and the datasheet specifies three possibile diameters: 25x45, 30x40 and 35x25.

    Datasheet is here:
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: Which diameter is this Hitachi capacitor?

      It looks to be taller than it's diameter so that excludes 35x25. A 50 cent euro coin has a diameter of 24.25 mm if you have one of those you should be able to determine which cap you require.

        Comment

        • Uranium-235
          Comrade Glimmer
          • Aug 2007
          • 5045
          • US
          #3
          Re: Which diameter is this Hitachi capacitor?

          do you not have a mm ruler?
          Cap Datasheet Depot: http://www.paullinebarger.net/DS/
          ^If you have datasheets not listed PM me

            Comment

            • stj
              Great Sage 齊天大聖
              • Dec 2009
              • 31288
              • Albion
              #4
              Re: Which diameter is this Hitachi capacitor?

              yes, use a ruler.
              i'm often finding custom made caps in things that dont match the datasheet.

                Comment

                • eccerr0r
                  Solder Sloth
                  • Nov 2012
                  • 8711
                  • USA
                  #5
                  Re: Which diameter is this Hitachi capacitor?

                  My guess is 25x45 because the capacitor looks fairly tall from the PCB. The 30x35 would look more squarish, and I'm estimating 25mm from other cues from the picture...

                    Comment

                    • Hitto
                      Senior Member
                      • Apr 2019
                      • 95
                      • Italy
                      #6
                      Re: Which diameter is this Hitachi capacitor?

                      Yes, they are 25mm! Thank you all.

                        Comment

                        Previous template Next

                        Related Topics

                        Collapse
                        • MORETTIGIAN
                          Capacitor detached from PCB – RTX 2070 Super Founders Edition
                          by MORETTIGIAN
                          Title:
                          Capacitor detached from PCB – RTX 2070 Super Founders Edition

                          Description:
                          During maintenance on an RTX 2070 SUPER Founders Edition, I found a capacitor lying on my desk after reassembly.
                          I did not notice it detaching, so I am unsure of its original location on the PCB.

                          Procedure performed:
                          - Removed backplate
                          - Cleaned heatsink and PCB with isopropyl alcohol + soft ESD brush
                          - Reapplied thermal compound
                          - Reassembled card

                          Observed behavior after reassembly:
                          - GPU powers on and operates normally under...
                          RTX 2070 SUPER
                          11 Photos
                          09-18-2025, 12:14 PM
                        • Prolog
                          RTX 3080 FE Identifying capacitor
                          by Prolog
                          Hi people, I hope this is the correct spot to post this, I'm new to the forum.

                          I have an RTX 3080 Founders Edition which has a burnt up capacitor (it was in parallel with another capacitor which appears damaged too), so I am hoping to be able to identify the capacitor values and order replacements.

                          I hope these photos make it clear which component I am referring to:
                          (yes, the soldering is a bit botched from removing the blown one, I know)

                          I have found the board schematic (attached), but there does not seem to be a boardview available. I have never...
                          12-01-2024, 08:27 PM
                        • Agent24
                          Dick Smith Q-1760 linear power supply filter capacitor question
                          by Agent24
                          I have acquired a used Dick Smith Q-1760 power supply - although the OEM is Manson Industrial
                          It has at least one problem.

                          The voltage control potentiometer VR2, 50K is faulty - going high resistance / open circuit in the CCW end and leading to the output voltage jumping around.
                          I have already ordered a replacement potentiometer, so that's not an issue.

                          Now, I want to replace all three electrolytics on the PCB as they are CapXon and I don't trust them so much, I will replace them with something better while I've got the thing apart anyway.
                          All are CapXon...
                          10-21-2025, 05:39 PM
                        • chth96
                          If I replace with inferior capacitor, Is it No harm to other IC components at all?
                          by chth96
                          I replaced some capacitor which is located on optical pickup pcb which is shown in the table below(PCB #2).Because it have been out of order.
                          Now,It works very well,But I just have found that all caps (6svpc100my and other part number as well) ,which is shown in the table below, has ultra-high ripple current spec.
                          It is not able to obtain any capacitor which can be a substitute for this ultra-high ripple current nichicon capacitor.
                          So I replaced it with samxon and rubycon's general capacitor(GP,YXA series).
                          I know that these capacitor will not last as long as nichicon capacitor...
                          12-22-2023, 04:34 AM
                        • chth96
                          How can I test non-polarized capacitor?
                          by chth96
                          I desoldered samwha NF capacitor(50v 5.6uf) from PCB circuit of 29inch CRT TV which have symptoms of no display after I heard sound of inrush of current to TV whenever I switch on this television.
                          I measured ESR value of this non-polarized capacitor(samwha NF capacitor 50v 5.6uf) by means of MESR-100 ESR meter and It displayed 0.3 ohm

                          And When I measured its capacitance with digital multimeter and LCR-T4 Mega328 meter, It displayed 10uf from DMM and 8uf from LCR-T4 meter.
                          I found catalogue of samwha capacitor(samwha-catalogue_3.pdf file), which is attached to this thread,...
                          06-02-2024, 07:31 PM
                        • Loading...
                        • No more items.
                        Working...