Panasonic NHG caps suitable for starter cap?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mikay786
    Badcaps Veteran
    • Aug 2014
    • 765
    • UK
    #1

    Panasonic NHG caps suitable for starter cap?

    Jamicon 4.7uf 400v - exploded

    Have got a couple Panasonic NHG caps in same value, would they be suitable replacements? Starter cap, one at the bottom. Connector next to it is AC in.
    Attached Files
    Tags: None
    • sam_sam_sam
      Badcaps Legend
      • Jul 2011
      • 6039
      • USA
      #2
      Re: Panasonic NHG caps suitable for starter cap?

      I do not see any reason why you can not use them

      It might be better if you used 450 volt caps instead 400 volt
      If the diameter is the right size and if it is not to tall
      Last edited by sam_sam_sam; 06-24-2017, 08:15 PM.

        Comment

        • mikay786
          Badcaps Veteran
          • Aug 2014
          • 765
          • UK
          #3
          Re: Panasonic NHG caps suitable for starter cap?

          Man these caps must be terrible, two of them have spilt their guts underneath and one exploded.

          Not Jamicon as stated above but Jackcon caps

          2 x Jackcon 4.7uf 400v that have leaked
          Attached Files

            Comment

            Previous template Next

            Related Topics

            Collapse
            • momaka
              Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
              by momaka
              I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

              For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

              https://www.badcaps.net/filedata/fetch?id=3591771


              https://www.badcaps.net/filedata/fetch?id=3591772

              It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

              https://www.badcaps.net/filedata/fetch?id=359177...
              03-12-2025, 03:42 PM
            • eryjus
              Heathkit IO-4205 Power Supply Caps
              by eryjus
              Hello,

              First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

              I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

              I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
              ...
              05-10-2023, 11:21 AM
            • Paxman_Swede
              Identifying caps on an old Zoom 9000
              by Paxman_Swede
              Hello!

              I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

              The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

              I have studied the board and...
              01-14-2025, 09:51 AM
            • JohnsonJ
              Allen&Heath XONE92 DJ mixer repair
              by JohnsonJ
              Hello everyone.

              I'm having issues with my DJ mixer, and after taking it apart and checking everything out, it seems that I need to replace 2 rotary potentiometers for the filter, and that the PSU has some caps burned. Hopefully these 2 fixes will solve my issues.

              The potentiometers I will just replace (hopefully the repairman I spoke with will indeed send me the spares, in case he doesn't, I'll update here if we can find a suitable replacement), but for the PSU caps I'd kindly ask you forum members, if anyone could help guide me in the right direction. I'm having difficulty...
              12-12-2020, 11:19 AM
            • momaka
              EVGA e-GeForce 7600 GS AGP 256MD2 [256-A8-N542-T2] with bad caps - fixed
              by momaka
              I did it again – I had to fulfill my inner desire to fix yet another old piece of hardware. This one is actually kind of worthwhile, too – it’s an EVGA e-GeForce 7600 GS AGP video card, model P/N: 256-A8-N542-T2. With the popularity of “retro” PCs from the Win9x to XP era going up, and the diminishing supply of decent AGP cards, it is expected their prices will go up. Or is it? I bought the this video card rather on the cheap side (~$9 USD shipped to my door), because the eBay seller listed it for parts or repair (and correctly noted the bad capacitors.)

              So, here is the...
              06-06-2020, 04:39 PM
            • Loading...
            • No more items.
            Working...