Mobo Recapped - Burn In Tests

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • risk_reversal
    New Member
    • Sep 2007
    • 6
    #1

    Mobo Recapped - Burn In Tests

    What tests should be run to confirm system integrity on a board that has been recapped.

    The recapped board (repaired at badcaps.net) has been installed, it boots to windows and seems fine at this stage.

    What I was going to do was run the following applications.

    1. HDD full diagnostics
    2. Run Memtest86 for 24hrs
    3. Run Prime95 (multiple tests) for 24hrs each
    4. Run 3Dmark for about 20-24hrs

    Pretty much the same tests that I would use to check an overclock.

    Are these tests sufficient to confirm that all the new caps / mobo are working fine, or is there something else that I should be running.

    Many thanks for any info provided.

    Cheers
    Tags: None
    • shadow
      Badcaps Veteran
      • Feb 2007
      • 732
      • Australia
      #2
      Re: Mobo Recapped - Burn In Tests

      I reckon that it is sufficient.

      It's a lot more than what I did!

      It seems that the Prime95 test and the Memtest86 test are the most widely used on these forums.

        Comment

        • risk_reversal
          New Member
          • Sep 2007
          • 6
          #3
          Re: Mobo Recapped - Burn In Tests

          Many thanks shadow.

          Cheers

            Comment

            Previous template Next

            Related Topics

            Collapse
            • ttmi100x
              HANNSG Hi221 -- 2 secs to black feat. CCFL flicker & "burn" marks on power board
              by ttmi100x
              Greetings everyone,


              I have a HANNSG Hi221 monitor that exhibits two seconds to black issues (backlight goes off, display is still on as confirmed by shining a flashlight on it) with some additional oddities...


              The monitor failed on me with a standard "2 seconds to black" some time ago prompting me to initially replace most of the electrolytic capacitors (some of them were bulging/leaking).
              Things kinda sorta worked for a night, then the problem returned along with some flickering and "buzzing" noises.

              Upon closer inspection...
              "Burnt" resistor
              6 Photos
              07-31-2024, 06:36 PM
            • howardc64
              Insignia NS-43D420NA20 backlight on no display - LCD panel burn failure
              by howardc64
              Eventually discovered a burn mark near lower corner of LCD. Here is a summary
              • Backlight on, no image
              • Disconnect right buffer board (view from front), left side display comes on
              • Masked off pin 7+8 (both ~12,5v on both left and right buffer board) from t-con to right buffer board (view from front) display works but have some lines
              • Buffer board is pretty simple
              Removed the front bezel to examine edge of the glass. Found burn mark on lower right (view from front). Plastic bezel covering the burn mark region shows heat signature on the inside surface facing the LCD panel. Last 2 pics. Bright...
              07-11-2025, 04:04 PM
            • ChaosLegionnaire
              what i went through dealing with my mobo with dead onboard sound!
              by ChaosLegionnaire
              so i took out one of my spare gigabyte ep35-ds3r mobos from storage for use to do some cpu, ram and video card testing of stuff i bought from ebay and got for free from momaka. he bought 50 e8400 cpus for cheap from ebay some years ago and i decided to help him relieve him of some of his supply since he had waaaay too many!! what did we say about hoarding too much stuff and depriving others of them?! *cough* socialism *cough* lol!

              i had to blow some dust off the board and heatsinks with the datavac as i didnt clean it up before putting it in storage. after finishing...
              09-13-2022, 09:02 AM
            • Cerberuska
              Mobo MSI B550-A PRO password popup
              by Cerberuska
              Hello guys,
              I have interesting problem. My MoBo MSI running on Ryzen 7 w/o graphics just good. I swapped to Ryzen 5 5600G and on the boot I stuck with screen on picture. Enter Password. I checked BIOS setting with Ryzen 7, no security is enabled, BIOS password or TPM.
              BIOS I updated to last one.
              any suggestions?
              And same thing for two different 5600G, and yes, MoBo supposed to support it.
              Thank you...
              1 Photo
              11-10-2024, 01:23 PM
            • mrsith
              Dell G3 17 3779 - no display after mobo replacement
              by mrsith
              Hi guys,

              I have a friend's Dell 3779 that came to me with severely shorted mobo. Did not manage to isolate the cause, most likely that was a bga shorted. Went for a replacement motherboard. Got one from China, apparently it's been tested prior to shipping. The mobo starts up normally but I am getting no display whatsoever.

              Tried using external monitor, but being blind I am not sure if laptops goes as far as booting to Windows, a d without it I cannot get hdmi to work. Can't see boot menu options to make sure it boots to Windows. Went ahead and did a blind bios update,...
              04-30-2023, 05:11 AM
            • Loading...
            • No more items.
            Working...