Re: Nippon - fake or not?
Here is pic of another side
Here is pic of another side
Attached Files
-
-
Re: Nippon - fake or not?
Well, I'm no cap expert when it comes to fake caps, but I looked at my small stash of KZE and KY caps, and some of them do indeed show quite a bit of variation in the quality of the sleeve print just like yours. So perhaps they are legit indeed. I bought all of my Chemicon KZE and KY caps from Digikey and Mouser, so I doubt I got fakes (plus, I've used many of them for my own repairs and nothing has gone bad yet).
+/- 20% tolerance as Joo noted.
Yes, those caps could be old stock. That last picture you posted shows that they all have different date codes. I don't know how to read them, though.
It all depends on what purpose the caps have in the circuit and the circuit design, so I can't pinpoint anything specifically. Some circuits just can't handle bad caps and can send huge voltage spikes to whatever is connected to that voltage rail.
I'm not a plasma guy, but I'll have a look in your thread.Comment
-
Re: Nippon - fake or not?
Actually, being old stock should increase the capacitance. s the cap sits unused, the oxide layer slowly thins. This would normally increase the capacitance, but lower the maximum voltage. I have to say, though, that they do actually look pretty genuine.
I still would not recommend using fleabay, especially since, being in the USA, you have plenty of options for authorised distributors such as digikey. Either of these probably would have done the job fine, and you can be certain that these are genuine:
Ruby ZLH - http://www.digikey.com/product-detai...873-ND/3563477
or
Panny FR - http://www.digikey.com/product-detai...397-ND/2433531I love putting bad caps and flat batteries in fire and watching them explode!!
No wonder it doesn't work! You installed the jumper wires backwards
Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium
Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 ProComment
-
Hi guys.I bought Macbook Pro mid 2014 15 inch model which did not came with charger.
I got new charger but judging by the specs seems it is fake one.Sadly I live in Bosnia and genuine charger is rare to find.
what to do?Should I use the fake one?
Will it damage the macbook?... -
I decided to take one of the Rubycon capacitors out of a phat Xbox 360 with a Zephyr motherboard and noticed that all the Rubycon capacitors near the CPU were fake. The capacitors in question are Rubycon MFZ 680uf 6.3V and they all have a bullseye bottom, something not found in genuine Rubycon capacitors. None of them were leaking, they all have the K top, and the system has never been opened before. It appears Microsoft was using fake capacitors in the Xbox 360, or the Chinese facility where the console was manufactured in was using them and passing them off a genuine. Just thought I'd share... -
-
Hello, I want to buy BGA balls (not stencils, only balls) but I don't know what size, it's just for reballing the new chip balled if the first attempt fail. So I will rarely use it. Probably chips are PMIC with max 60 balls. I don't need to reball EC chips from laptops of big chips like that.
So what are the 2 or 3 most used BGA balls sizes I should have for cover the jobs please ? -
Hy guys, i have this lenovo TB-X605F with charging problem, the tablet is fake charging, i have replaced the charging connector twice, it only draws 0.40 Amps when pluging the cable for the first time then it stops drawing any Amps but the tablet keeps showing the charging image at 0% as long as i keep it connected. I have no voltage at the battery connector with the cable pluged, but i have 5 volts after usb connector on some testing points on the board.
Comment