identify a cap o hp-dv6700 MB

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Laith
    Member
    • May 2013
    • 12
    • Jordan
    #1

    identify a cap o hp-dv6700 MB

    Hello, i have a dv6700 for a customer that runs for 1-2 seconds only, i have re-flowed the GPU(twice) but the problem stays.. so i want to try to change the tow capacitors next to the cpu before replacing the gpu. the problem is that i am not sure about the capacitor values "i never saw them before" so i hope that you guys can help me(tell me the uf & v) of them. picture in the attachment

    maybe 100uf/25v??

    thank you very much
    Attached Files
    Last edited by Laith; 03-08-2014, 01:54 PM. Reason: forgot to say thank you ..
    Tags: None
    • Duncanbest
      Senior Member
      • Jul 2012
      • 81
      • Taiwan
      #2
      Re: identify a cap o hp-dv6700 MB

      https://cdn.badcaps-static.com/pdfs/...efb5c1729b.pdf

      100uf 25v

        Comment

        • Laith
          Member
          • May 2013
          • 12
          • Jordan
          #3
          Re: identify a cap o hp-dv6700 MB

          Thank you Duncanbest ,
          i have alady replaced it with 100uf 25v but didn't had the courage to try it , now that am sure about it i'll be trying it next morning .

            Comment

            • Th3_uN1Qu3
              Believe in
              • Jul 2010
              • 6031
              • Romania
              #4
              Re: identify a cap o hp-dv6700 MB

              If it only runs for 2 seconds and shuts down then the GPU/chipset is likely shot. Measure across the small ceramic capacitors on the top of the chipset and GPU (if it has one). If any one of them measures under 4 ohms then the chipset is shorted and needs to be replaced.
              Originally posted by PeteS in CA
              Remember that by the time consequences of a short-sighted decision are experienced, the idiot who made the bad decision may have already been promoted or moved on to a better job at another company.
              A working TV? How boring!

                Comment

                Previous template Next

                Related Topics

                Collapse
                • thesame
                  DVR HIKVISION DS-7208HWI-E1/A BOARD DS-80104 REV 2.2 help identify burnt components
                  by thesame
                  Hy guys , i have a DVR board DS-80104 REV 2.2 that was powered wrong, i have some smds on the board that are blown and i can't identify them , maybe if someone has this board somehow and we can identify the smds', i have searched online and i can't find a schematic.
                  The smds are SOT-23-6 , one of them i think it has the marking ADJF since i found another one on the board with this marking , but the other one it seems that it starts with AG or it looks like. I would really apreciate if someone could help me identify those IC's .

                  ​...
                  02-27-2024, 04:31 AM
                • silver60618
                  Lenovo Legion 7 - Help Identify IC
                  by silver60618
                  Hi gang, its a long shot, but working on Lenovo Legion Pro 7 motherboard NM-F091, and trying to identify this component near GPU with marking "eHFQH" that is burned and shorting the board. Looks like power management IC

                  I couldnt find any schematic or boardview. The CPU side also has same chip. Any way to identify this chip? or take measurements from the good chip to determine what it is?

                  Any help would be appreciated...
                  07-02-2025, 12:16 PM
                • chth96
                  How can I identify varistor which have been blew up?
                  by chth96
                  I mistakely pluged 100v japanese retro game console to 220v outlet.
                  So It seems that glass fuse and varistor have been blew up.
                  I can identify that voltage and ampere value of glass fuse(250V LF 1.6A),but It is impossible to identify varistor type in my sega saturn PSU(YAMAHA 35M07U XR258)
                  Is there any way to identify varistor type in my sega saturn PSU?
                  Any reply would be appreciated.


                  EDIT:
                  It seems that I finally found out what type this black varistor is. It is Panasonic ERZV05D221 “ZNR” Transient/Surge Absorbers (Type D) Varistor Voltage...
                  2 Photos
                  11-26-2023, 08:52 AM
                • freakorio
                  Need Help To Identify Component on Ymain LJ41-05120A
                  by freakorio
                  Hi guys , i hope this is the right place , i got Plasma Samsung PS-50Q91H and i need to repair Ymain LJ41-05120A , but those component are burn and i can not identify to replace those part , and the part are blue capacitor and the location are C5105 and C5106 and here i attach the part that need to identify , and one more thing , i also need to replace Zener Diode on location ZD5502 and the part are BZV55C because mine is short but i don't know the voltage because those parts are release with many type of voltage. Looking forward for your kindly reply
                  1 Photo
                  05-21-2024, 02:32 AM
                • baiceanu_stefan
                  nm-f251 Schematic, boardview or help identify componente
                  by baiceanu_stefan
                  Hello, I have a legion pro 5 16arx8 serial number pf4bf4aw mb code nm-f251 rev1.0 which was dissasembled by the client for cleaning. Now it does start but for 20 secs after that fans run at maximum and then shut down. Found PU8302 burned but cannot identify it the part. It is written eHFAA on it but didn't found any info, no boardview, nothing. Can anyone help identify the part so I can order it from somwhere? Ataching some pictures of the motherboard, serial number and part. Than\k you...
                  04-24-2024, 12:49 AM
                • Loading...
                • No more items.
                Working...