Crap, damaged fp cap

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Gabriel
    Badcaps Veteran
    • Jan 2010
    • 620
    • Norway

    #1

    Crap, damaged fp cap

    So I find a nice asus mb on the garbage dump - had vga,dvi and hdmi and thought it might work so I took it home.

    Sure, I managed to damage a polymer cap and replaced with the closest thing I had - mb working just fine however I think the cap is a little hot.

    The cap I broke off was a Fp5K 98ak 271 16, changed it to a Fujitsu 883 271 16.

    I cant seem to find datasheet for any of these two.

    Had a look at Nichicon but cant find a 5k series or a 883 series either.

    Any idea ?
    Attached Files
  • yyonline
    Badcaps Veteran
    • Jul 2009
    • 692
    • USA

    #2
    Re: Crap, damaged fp cap

    FP series vs. markings is a bit of a mystery...

    Best I can figure, the k on the second line indicates the series, as the other series markings seem to follow that pattern. However, I can't find anything on the FP website with a "k" marking.

    http://www.fpcap.jp/en/products/line-up.html

    Comment

    • Gabriel
      Badcaps Veteran
      • Jan 2010
      • 620
      • Norway

      #3
      Re: Crap, damaged fp cap

      I thought Fp was sold to nichicon, can't find anything there either with a 'k' marking.

      Comment

      • kc8adu
        Super Moderator
        • Nov 2003
        • 8832
        • U.S.A!

        #4
        Re: Crap, damaged fp cap

        you should be ok.
        both are 270@16.

        Comment

        • joedaddy277
          Member
          • Aug 2008
          • 13

          #5
          Re: Crap, damaged fp cap

          Fp L8 series with 5000 hr. endurance ?

          Comment

          Related Topics

          Collapse

          • DrFalken
            Dell Latitude 5530: damaged USB (type A) ports, cannot find replacements
            by DrFalken
            Hello,
            Yesterday a customer brought us a Latitude 5530 with 2 damaged USB ports (type A).
            The ports are made by Singatron and, checking the measurements and soldering points, the model should be this one: https://www.singatron.com.tw/en/product/file/280177-1
            I checked at RS, TME, Farnell but I didn't find this model
            Where can I find them? Something compatible is also fine...

            Thanks!!​
            10-19-2024, 01:43 AM
          • Vesko356
            [Guide] How to find the right HP bios version to flash
            by Vesko356
            First of all thanks to all of our members who have posted previously all methods posted here.
            Please leave a comment if you find something new,or have anything else to add.
            -----------------------------------------------------------------------------------------

            Find by serial number,model number or series

            If you know the laptop serial or model number go to HP support https://support.hp.com/us-en/drivers/laptops .
            Enter the serial number or model number and click submit.On the next screen you will have to enter the OS
            Operating system and OS version.If...
            08-11-2023, 03:27 AM
          • DrewPhillips
            Capacitor Diarrhea - Nichicon PL Series
            by DrewPhillips
            Hello All, I have on the bench a couple of PSU's which have some failed Nichicon PL series caps. They didn't "puke" their guts through the top, but instead "diarrhea'ed" corrosive brown electrolyte through the bottom, down the legs and onto the board. On one cap, the electrolyte rotted the cap right off the board leaving 2 little stubs, and also corroded a trace on the foil side.

            The PSU's are Power-One MAP series and are ringing-choke topology. The semiconductors have date codes in 1993. The PSU's were used in a commercial application, fan-cooled. They had failed...
            03-02-2025, 10:18 PM
          • corrize
            Where to find a very small fpc connector 0.3mm between 2 pins ?
            by corrize
            Hello, I search this connector (oxydated).
            It's a fpc zif low profile connector. It come from camera sensor, it is very small : 0.3mm between 2 pins.
            I ordered 2 from Aliexpress called « 0.3mm pitch » but one was 0.5mm between 2 pins and the other 0.6mm. In fact « 0.3mm pitch » seams to be the pad width and not the distance between 2 pins.
            I can't find it. The other websites like mouser dont show the datasheet, and I can't check if it is 0.3mm between 2 pins ?


            Do you know how to find this connector please ? What is the exact name for find it ?

            ​...
            08-06-2024, 05:25 PM
          • temyth
            Sentey ATX PSU - ERP650-PS - Trying to find out the right Standby IC
            by temyth
            Greetings! I have this ERP650-PS atx power supply, it is a relatively simple psu, the primary has a driver IC that controls the two main mosfets (two 20n60S5), together with a Classic Standby circuit with a PWM IC (not a FET like the VIper22A) , relatively similar to the SDC606P.

            The whole point is that I got this power supply years ago when I had no knowledge, apparently the PWM IC was burned because someone turned the power supply on with the switch at 110v in a 220v network (classic error). Important detail: the power supply at the time came without the primary capacitors.
            ...
            01-07-2024, 04:50 PM
          • Loading...
          • No more items.
          Working...