can anyone id?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kc8adu
    Super Moderator
    • Nov 2003
    • 8832
    • U.S.A!
    #1

    can anyone id?

    just brought in a board from an emachines p4 box with you guessed it.bad caps.
    these are black with a logo resembling a lower case a with a tail on the left as well as the right.
    no pics yet but will post tomorrow.
    Tags: None
    • linuxguru
      Badcaps Legend
      • Apr 2005
      • 1564
      #2
      Re: can anyone id?

      Photo please? I haven't seen anything like it in my pulls yet. Perhaps intended to be a Hitachi knockoff?

        Comment

        • kc8adu
          Super Moderator
          • Nov 2003
          • 8832
          • U.S.A!
          #3
          Re: can anyone id?

          pic
          btw its an imperial-gv board.
          with a gateway part number too.
          Attached Files
          Last edited by kc8adu; 12-15-2005, 06:23 PM.

            Comment

            • Rainbow
              Badcaps Legend
              • Aug 2005
              • 1371
              #4
              Re: can anyone id?

              https://www.badcaps.net/forum/showthread.php?t=975
              Looks like I'm going to trash them all and buy Jamicons instead

                Comment

                • willawake
                  Super Modulator
                  • Nov 2003
                  • 8457
                  • Greece
                  #5
                  Re: can anyone id?

                  hehe Partsnic now on the black list.
                  NEXT.......
                  capacitor lab yachtmati techmati

                    Comment

                    • Chris1992
                      Badcaps Veteran
                      • Apr 2005
                      • 561
                      #6
                      Re: can anyone id?

                      bulging at the plug too -- real crap. I have some Daewoo caps in a Trigem Lomita board. Watching carefully....
                      The great capacitor showdown!

                        Comment

                        • kc8adu
                          Super Moderator
                          • Nov 2003
                          • 8832
                          • U.S.A!
                          #7
                          Re: can anyone id?

                          thought i had seen that xwindows logo vent before...

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • Thetechdude
                              MSI Ventus RTX 4080 16G Broadview schematic needed
                              by Thetechdude
                              Hi guys, I'm working on a MSI Ventus RTX 4080 16G. The GPU has 12v, 5v, however what I assume is the 1.8v rail has 1.1v and what I assume to be PEX is 0v. As you may have guessed already there is no Vmem and no Vcore.

                              I have looked around in related forum posts for a schematic so Much appreciated if anyone can share a Broadview schematic.

                              Thanks.
                              07-15-2025, 11:15 AM
                            • jm1234
                              Reolink RLC-410-5MP - buck convertor
                              by jm1234
                              Hi,
                              it's a PoE camera and it stopped working. Using thermal image I identified failing component U22 marked as 16AF which seems to be buck convertor TI https://www.alldatasheet.net/datashe...62569DBVR.html. I took it out and It is inteed shorted on the output. However, after I took it out, the resistance between the output pads (on the board) still shows 190ohm, is that bit low?
                              Another issue is, seems to me I must be missing one of the tiny resistors R810 that should make up the voltage devider for the buck convertor. Honestly I did this months ago, I cannot...
                              07-14-2025, 04:30 AM
                            • mon2
                              A2141 Not powering on - case study
                              by mon2
                              This is a case study on a 'sudden death' A2141 unit brought in for service.

                              USB-C meter is @ 5v with ~0A current draw.

                              a) Disconnected battery. No power to the machine. Applied the Qianli Tail tester with the USB-C connector. Each USB-C power connector was green with the diode mode of testing. CD321x are not defective as originally thought.

                              b) PPBUS_g3h is not shorted but is a low voltage due to the low INPUT voltage of 5v being boosted. On a random power up attempt, PPBUS_g3h was at the expected 12v63 range AND input voltage was observed to be @ 20v for...
                              07-10-2025, 10:58 AM
                            • djpaesgana
                              Hi i need help with a Dell latitude 14 5420 GDF40 LA-K491P Rev 2.0 (A01) 2020-11-16
                              by djpaesgana
                              Hi i need help with a Dell latitude 14 5420 GDF40 LA-K491P Rev 2.0 (A01) 2020-11-16 , it charges on usb type C i checked the charger with a pd decoy and a electronic charge its ok when, i tested the usb c jack with a tail tester it reads ok (photo incluided), then with a usb charge tester it looks like its trying to negotiate the PD but ressets i openned the laptop and with a thermal camera i noticed 3 ICS getting hot the TPS65994 (UT3) the ISL95860HRTZ (PU601) and the IC SLGC55544CVTR (UI1) this one checking it on the micoscope looks damaged visually (picture incuided) and looking on the Boardview...
                              05-14-2025, 08:12 PM
                            • AK_777
                              Sony KD-65A1 Repair – 4 Red Blinks Error
                              by AK_777
                              Hi everyone!
                              I have a Sony KD-65A1 TV with a fault – 4 red LED blinks. After disassembly and visual inspection, I found that the G76 power board and DKA board had been replaced. It is also possible that TCON was replaced, but I am not sure – there are a few marker marks that could be factory-made.

                              Based on assumptions, the previous service attempted to solve the issue by replacing potentially faulty components. I decided to investigate further, found a service manual, and figured out a way to power up the power supply unit autonomously and put the OLED panel and...
                              02-20-2025, 04:15 PM
                            • Loading...
                            • No more items.
                            Working...