could someone post dump for tv blaupunkt TP.MSD309.BP75
please
please
-
-
Re: need dump blaupunkt TP.MSD309.BP75
Trouble is--This Sky-Media/cheap Chinese rubbish has very little support, maybe easier to find complete mainboard...TELEFIX
How PLASMA SCREENS WORK, X-SUS and Y-SUS what they do--
http://www.irf.com/technical-info/appnotes/an-1088.pdf
PLEASE DO NOT EMAIL ME PRIVATELY FOR REPAIR ADVICE. QUESTIONS BELONG ON THE FORUM! -
Re: need dump blaupunkt TP.MSD309.BP75
post 8 maybe
https://www.badcaps.net/forum/showthread.php?t=42022Comment
-
Re: need dump blaupunkt TP.MSD309.BP75
At the end I could get it.
https://dl.dropboxusercontent.com/u/...1/CVT_308B.bin
Name of archive is CVT_308B.bin
Its for 4MB epproms
This archive is for B32PW122BK TV with LC320DXN-SFR2 panel.
Now tv is working but there is a very annoying sound like reactance´s fluorescent tube.Last edited by trosdepep; 05-09-2015, 11:38 AM.Comment
-
Re: need dump blaupunkt TP.MSD309.BP75
voila'Comment
-
Re: need dump blaupunkt TP.MSD309.BP75
sorry , errorComment
-
Re: need dump blaupunkt TP.MSD309.BP75
I searched for a firmware for my TV, but so far cannot find it.
My TV is blaupunkt 32/122i-gb-3b2-hbkup-eu
with board tp.msd309.bp75
and LCD panel lc320dxn-sfr2 (from LG).
All the already flashed SPI or firmware I can find is for panel from Samsung LTA320A33.
Any help I can get would be welcome.
ThxComment
-
Hi all,
This is my first post here (I am very new to forums!) and I hope someone can help. I am looking for a full dump of the BIOS of a HP Proliant Microserver Gen 8 so that I can get this mini server running again. (BIOS version J06 2019-04-04, chip 25Q064A). I think my board was partially bricked after a failed BIOS update.
I got it second hand in this state and all the normal attempts at bios restoration have not worked. I have even desoldered the chip and tried to load the actual BIOS from HP, but it is missing some parts needed to boot the system.
I... -
Dear all,
I have a ASUS ZenBook UX480F with the following symptoms:
I suspect it is a BIOS issue. So I decided to try to clean the ME region. I followed the guide on win-raid, and I believe I have done everything correctly. My problem is: when I open the outimage.bin in ME Analyzer, it says that it is Extracted, and not Region, Extracted as it should be. Is it normal, or did I do something not correctly? This is my first experience editing BIOS files.
I would appreciate if someone could take time to explain the issue, so that I can learn. But I would... -
The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.
Suspected Cause:
I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.
Troubleshooting Attempts:
... -
Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.
I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"? -
Hi everyone,
I'm working on removing an administrative BIOS lock (Supervisor/Admin Password) on a laptop.
The board has three SPI flash chips:
- W25Q64FV (main BIOS)
- W25Q32FV (EC/TPM)
- W25X10CL (configuration)
I was able to read the dump from the W25Q64FV chip, CRC32 = 0x3DE23E27.
The dump contains protection that needs to be removed.
If anyone has a clean or unlocked BIOS dump for W25Q64FV, I’d really appreciate it!
I’m also happy to share my dump for comparison if needed.
Laptop model: [please specify, e.g....
Comment