Profile pic

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kRiSpY_d
    New Member
    • Apr 2022
    • 3
    • US

    #1

    Profile pic

Related Topics

Collapse

  • Geomih
    CPU socket replacement soldering profile
    by Geomih
    Hi All - I am hoping someone can help with some pointers (complete noob here!)

    I have recently purchased a Scotle HR460 BGA reball machine (it's a bit old and I think the company no longer exists either), but as far as I can tell it is a competent and unmolested machine that should be good enough for my needs.
    My biggest problem is that it came with no profiles, and I must re-create all of them from scratch, something that is very scary for someone that doesn't really know what they are doing.
    The simple stuff like a small memory module isn't a big deal because there are
    ...
    12-11-2023, 11:07 AM
  • livo
    ACHI IR PRO SC bga rework profile needed
    by livo
    Hi, so I do console repairs normally, but I have a friend that needs me to reball their 2080ti GPU, does anyone have a profile for the ACHI IR PRO SC they could share. I know i my need to adjust is slightly to match my machine, I don't have any other GPUs to run a test on to build a profile. Thanks inadvance
    11-14-2023, 05:36 AM
  • ktmmotocross
    EUROCOM P370EM Scorpius - bad cooling/fan profile - gpu at 95c 7870M
    by ktmmotocross
    Hello. Have this EUROCOM P370EM Scorpius that have bad cooling/fan profile so gpu run on full load at 95c on 7870M

    Vendor wrote that with fn+1 fan goes full throttle but it not work.

    Can be fan profile changed in bios?
    06-28-2022, 10:52 AM
  • nubie
    No power Dell RX6500 Low Profile
    by nubie
    I was sure this worked last time I used it, but today, dead.
    The only chips getting heat are circled in green.
    The IC in blue has 12v in, and 0v out, it seems to be feeding the other power mosfets, because the output is connected to the others (unless I'm wrong and they are layed out differently than I think.)

    Did not find any shorts, but the electrolytic caps show ~2 Ohm, unless thats a short 🙃
    ...
    05-30-2025, 01:45 PM
  • l3emarsh
    Vestel toolbox 1.1 profile change will not work?
    by l3emarsh
    Hello all,

    I have a 55" 4K HDR Smart tv which is Panasonic but has a Vestel 17mb130s main board and it crashed resently, with the help of Diah in my first thread I loaded new firmware but from a Finlux tv and it worked and I have been using it since then.
    my problem is that it has no freeview play and its starting to piss me off as there is a lot I cant watch.
    In the profile I downloaded from the service menu onto usb stick I changed the option for Freeview Play from off to on and I can't seem to upload the profile back onto the tv as each time I try the...
    08-26-2020, 02:29 PM
  • Loading...
  • No more items.
Working...