Re: ACHI IR PRO SC bga rework profile needed
Thank you
Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
ACHI IR PRO SC bga rework profile needed
Hi, so I do console repairs normally, but I have a friend that needs me to reball their 2080ti GPU, does anyone have a profile for the ACHI IR PRO SC they could share. I know i my need to adjust is slightly to match my machine, I don't have any other GPUs to run a test on to build a profile. Thanks inadvance
-
Re: Honton HT-1212 help
Thanks for that I will take a look...
Leave a comment:
-
Re: Honton HT-1212 help
So I managed to sort it, I played with the settings till I got it working but it was still over shoot the temp till I found a video on you tube which I had not seen before showing their settings on a Scotle ir 6000 which had the same as mine. So I copied them to my controller and it is now working a treat.
in case anyone needs them they are
HP 10
LP 10
C 0
OH 300
P10
I or backwards C 130
d 30
r 02
Ar 0
LoK 000
Leave a comment:
-
Re: Honton HT-1212 help
Hi, yes I have seen that ins manual but the setting are still different on mine but thanks for the help.
The settings I have on mine below with what the settings do that I have been able to work out,
The model is RKC REX-C10FK02-M*EN
Setting Range Explain
HP -999 to +999
LP -999 to +999
C -100 to +100 sensor calibration
OH -999 to +999
P 0 to 999 keeps going round if I keep button pressed
d 0 to 999
r ...Last edited by livo; 01-07-2022, 03:42 AM.
Leave a comment:
-
Honton HT-1212 help
Hi, looking for some help with a Honton HT-1212 I have bought if possible, I bought it off eBay as faulty due to the last owner messing with the settings so it will would no longer work (I have tried a Rex C100 from another machine of mine and it works with this controller), It has a Rex-C10 PID controller fitted but I am unable to find the correct manual for this controller, I can find a manual that says it is for the Rex C10 as well as the Rex C100 etc but the setting names of some of the settings are different the first 2 settings on my Rex-C10 are HP and LP, does anyone have the correct manual...
-
Help with lg 60pb660v
hi, got a issue with a lg tv i have been given, i have no 18v on the y sus board or z sus board, the issue is the same as in this thread
[url]https://www.badcaps.net/forum/showthread.php?t=72679&highlight=LG+60PB660V[/url]
but there is no remedy for the fix please could someone poss point me in the right direction if poss, or to a circuit schematic i normally fix consoles and phones not tvs, Thanks in advancehttps://hi, got a issue with a lg tv...60PB660V[/url]
-
Re: LG 60PB660V Plasma tv Help Please
Did anyone find i fix for this issue?
Leave a comment:
No activity results to display
Show More
Leave a comment: