ID SOT223

Collapse
This topic has been answered.
X
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Onebigburb
    New Member
    • Mar 2025
    • 4
    • Usa
    #1

    ID SOT223

    Well, I managed to let the magic smoke out. I need help identifying some what I think are sot223 voltage regulators. Two say 96ab on first line no3 on second line. One says 94ac on first line no5 on second line. I dont know if they are pnp or npn? It appears power is on right leg so npn? Any help appreciated the internet has no info I can find.
    Attached Files
    Tags: None
    • Answer selected by Onebigburb at 03-15-2025, 09:25 AM.
      truclacicr
      Badcaps Veteran
      • Apr 2019
      • 299
      • australia
      http://markingcodes.com/search/c/n03a (LM1117MPX-ADJ, adjustable 800mA Low-Dropout Linear Regulator)

      http://markingcodes.com/search/c/n05a (LM1117MPX-3.3, fixed 3.3V, 800mA Low-Dropout Linear Regulator)
        • Selected Answer

        Comment

        • truclacicr
          Badcaps Veteran
          • Apr 2019
          • 299
          • australia
          #2
          http://markingcodes.com/search/c/n03a (LM1117MPX-ADJ, adjustable 800mA Low-Dropout Linear Regulator)

          http://markingcodes.com/search/c/n05a (LM1117MPX-3.3, fixed 3.3V, 800mA Low-Dropout Linear Regulator)
            • Selected Answer

            Comment

            • Onebigburb
              New Member
              • Mar 2025
              • 4
              • Usa
              #3
              Great site and I thank you very much!

                Comment

                Previous template Next

                Related Topics

                Collapse
                • cubytus
                  Samsung UN50TU8000FXZC shows thin horizontal green line when warm
                  by cubytus
                  Hi to all,

                  I was given this TV, an entry-level 4K 50" set. Some have criticized its lack of contrast and relatively poor colour rendering, but for my needs, it's very decent.

                  I reset everything to factory settings, but this line keeps on fading in and out when watching a streaming channel from the Tizen firmware. Interestingly, it only happens when TV is warm, after about 1h45 of it being turned on.

                  Watching a movie from an external source doesn't trigger the line as easily (needs 2 hours), and from a normal viewing distance, is hardly noticeable. It...
                  1 Photo
                  01-10-2024, 01:26 AM
                • TrueSword88
                  Kogan - KALED65XU9220STB - Blue Vertical Line
                  by TrueSword88
                  Hi all.

                  I have a Kogan 65' LCD Panel with a thin blue vertical line (top to bottom) on left hand side of panel.
                  The line just happens to coincide with the end of COF and start of the next COF (attached).

                  The line is permanent no matter what I've tried. I've tried pressure testing the panel (top to bottom) and all over, I didn't notice any difference with the line, either temporary or semi-permanent.

                  Also tried unplugging all flex cables, cleaned with isopropyl then re-inserting to no avail - line remains.


                  Hoping to fix...
                  05-05-2023, 04:28 PM
                • FALKLAN
                  Running Line Voltage and Integrating LED Pods - Automotive
                  by FALKLAN
                  Howdy everyone! I hope all is well where ever you are!

                  I'm attempting to integrate a couple of LED pods into an automotive reverse lamp circuit. The problem being, while the vehicle is running there is a 8.5v current present on the reverse lamp power wire. Needless to say is that all LED pods and lights dimly illuminate while the 8.5v is present, so the LEDs are always powered on while the vehicle is running. When the vehicle is shifted into reverse, the voltage changes to 12 volts.

                  I am uncertain how to convert this line into a switched 12v output line for the LED pods....
                  02-05-2025, 12:30 AM
                • mindoverflow
                  ASUS GTX 1650 Gpu.Initialize Interrupt request line stuck asserted
                  by mindoverflow
                  hello,

                  there is an asus gtx1650 which displays fine in windows but if i run a benchmark test it displays artifacts and the driver crashes after a second or two.

                  I changed pads and thermal paste.

                  I run mats test but it is reporting 0 errors.

                  I then tried to run the mods version 400.271_1650 test, it first ran and stopped with a 'breakpoints limit reached after 5 retries' error and the fans went full speed.

                  After a reboot, I tried to run the test again, but now the test fails and says "ERROR: Couldn't clear GPU's interrupt...
                  02-09-2022, 03:22 PM
                • Technomancer
                  Nintendo 2DS SD Card Reader issue. Problem on the clock line?
                  by Technomancer
                  I have a 2DS that I am working on that has a problem reading SD cards. It knows that card is in the slot (which, means the detect pin is working anyway) but it says it can’t read the card.

                  Here is what I have done so far:
                  -Tried SD card in another 2DS and on PC, works great.
                  -Tried piggybacking another SD card slot (just so I didn’t have to take the other one off), same issue.
                  -Compared voltage drop readings from a working 2DS to the faulty one. All reads are very close except one, the 7th pin from the left, with the pins closest to you, which I believe...
                  06-07-2022, 09:01 PM
                • Loading...
                • No more items.
                Working...