New Members - please post your introductions here

[nukept]

Re: New Members - please post your introductions here

Hey, I am an engineer in SE Tennessee.

[kirsod]

Re: New Members - please post your introductions here

Hello, I'm pretty new to all of this, I've never really attempted any electronic repair until recently when my Samsung went down. I am so impressed with all of the knowledge and experience so many of you all have. It is a pleasure to be apart of this awesome forum.
Thank you

[Experimentalist]

Re: New Members - please post your introductions here

Hello folks.

You can thank Hannspree for roasting caps on an open mainboard and sending me here.

I have a BSEE degree, multimeter, oscilloscope, soldering iron and I ordered some patience to crack this hothouse tomato of a monitor open to replace some caps. Should arrive by Tuesday.

Good luck with your repairs and thanks for the helpful advice and info folks!

[valen777]

Re: New Members - please post your introductions here

Hi. I found this site when was looking for solution to fix my monitor Acer AL 1916w. Im newbie in this area. I know how to install remote starters for cars it is kinda hobby. So will take some time to learn new deeper way to work with my soldering iron

[markjmatthews]

Re: New Members - please post your introductions here

Yo Folks!
I'm a computer programmer in Los Angeles, and I dabble in electronic repair in my spare time for fun! Looking forward to meeting all y'alls!

[Johnmoreno72]

Re: New Members - please post your introductions here

Hello all, I'm Johnny. I'm an Electrical Engineer by trade, though I have little experience repairing analog devices. That's why I'm here. To share my knowledge and learn from all of you.

[eltioblasco]

Re: New Members - please post your introductions here

Hello,

Really nice forum.

I am just trying to repair a dell monitor.

I think it would be possible with the info in you forum

[pj.pinch]

Re: New Members - please post your introductions here

Hello,

Nick From Easter Africa, Kenya To be precise. Electronics tinker type,............. Comp. Science major. Honored to join.

Cheers.

[caballerogsm]

Re: New Members - please post your introductions here

hello everyone and specially all staff and admin,

im new here... from Philippines...

[Sulaiman000001]

Re: New Members - please post your introductions here

Hello all, Just joined today,
I am a bound to a bench all day repairing industrial electronics, all kinds of cr@p.
My first system was a Sinclair ZX81 but I learned programming on a PDP11 and an ICL mainframe,
the first microprocessor development kit that I used for work (Lucas Ignition Department)
was for Motorola 6800 D2 kit with Hex keypad, moved on to Intel 8048 etc.
The first pre-release 8048 processor that I worked on cost equivalent to two months of my pay!
Worked on all kinds of stuff, moved overseas and worked as a mainframe repair guy, eventually specialising in communications.
Took a wrong career turn somewhere and now mostly swapping new caps for old (maybe 1/3 of all industrial electronic faults that I see)

[vforce1]

Re: New Members - please post your introductions here

hello guys, just came here to fix this un46d6420ufxza tcon issue from what i gather if anyone can point me in the right direction id appreciate it

[malikbilalahmad]

Re: New Members - please post your introductions here

Hello friends
i am malik bilal ahmad from srinagar kashmir j&k india i am working with mobiles but i want to become a member of laptop world
thanks

[malikbilalahmad]

Re: New Members - please post your introductions here

In my dell inspiron-15_3521 laptop suddenly happens a problem , only power led on, fan works no display no any kind of no any led on keyboard no dvd rom works only power led and fan works what is the problem can any body help me please

[Larry129]

Re: New Members - please post your introductions here

Hey this is retired Engineer and DIYer. Just got replacement A board for my Panasonic 50" plasma, and now I have a picture! Only problem is the picture doesn't fill the screen. Any suggestions about what's going on. The TV is TH-50PX75U and the board is TNPH60921A. Note, the owner manual for this TV is also for a TH-42PX75U and I've seen where the same board is used for both 43" and 50". I'm wondering if there's a jumper or switch on the A board I'm supposed to change; I got my board from eBay seller and maybe it came from 42" tv?

[Larry129]

Re: New Members - please post your introductions here

Hey I'm a champion DIYer. I've done plumbing, carpentry, furniture building, ceramic tile, electrical house wiring, masonry, landscaping, almost everything. But this is first time inside a TV. This sight has been a big help and given me just enough encouragement/confidence to take my storm-blown 50" plasma from not working at all to working albeit one glitch; picture doesn't fill screen. So planning to see if anyone here can help. Great site.

[swamper8]

Re: New Members - please post your introductions here

Hi,
I'm an electrical engineering technician from Enfield, CT.

[mrtelevision]

Re: New Members - please post your introductions here

after 50 plus years in tv service I've retired but still like to see what is going on in the service industry.
mrtelevision says hello from the ozarks of missouri

[dbreu]

Re: New Members - please post your introductions here

Hello everyone!

MY name is Dave and I'm a noobie to electronics, and currently studying to receive a bachelor's degree in Computer Engineering. I am excited for all the information I'll be receiving (and hopefully giving) in the future. Cheers everyone!

[jlunavtgrad]

Re: New Members - please post your introductions here

Hello. Very cool site. I'm a computer engineer in North Carolina. My Plasma TV just died and I was shocked to find out they don't make plasma tvs any more!

[poldog]

Re: New Members - please post your introductions here

Hi,

I'm Ivan and I love electronics and mechanics.
I love to buy and fix all...TVs CARs dcc...
I'm an engineer and a technician.
I hope that I will be useful for the community!!!