UE32T5370 need eprom dump

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Davi.p
    Hobbist Tech
    • Sep 2009
    • 4281
    • Italy - Milan

    #1

    UE32T5370 need eprom dump

    Hi, merry Christmas..
    i need good dump for the model in topic, brand Samsung, the chip is the EN25Q40B, near the eth socket, main board is bn91-21809k and is built in also UE32T5372 etc..
    Bye bye..
    Last edited by Davi.p; 12-24-2022, 02:10 PM.
  • lotas
    Badcaps Legend
    • Jan 2016
    • 4513
    • Russia

    #2
    Re: UE32T5370 need eprom dump

    Try.
    Attached Files

    Comment

    • Davi.p
      Hobbist Tech
      • Sep 2009
      • 4281
      • Italy - Milan

      #3
      Re: UE32T5370 need eprom dump

      Thanks Lotas! The file is for a colleague, i'll let inform after holidays if it works properly , Bye!

      Comment

      • lotas
        Badcaps Legend
        • Jan 2016
        • 4513
        • Russia

        #4
        Re: UE32T5370 need eprom dump

        Ok.

        Comment

        • Davi.p
          Hobbist Tech
          • Sep 2009
          • 4281
          • Italy - Milan

          #5
          Re: UE32T5370 need eprom dump

          Ok the colleague already tested the new dump and it worked like a charm, thanks again you're a master..

          Comment

          • lotas
            Badcaps Legend
            • Jan 2016
            • 4513
            • Russia

            #6
            Re: UE32T5370 need eprom dump

            Thanks, I'm glad that I managed only with SPI Flash firmware, and not eMMC.

            Comment

            • noname512
              Member
              • Oct 2018
              • 41
              • United Kingdom

              #7
              Re: UE32T5370 need eprom dump

              tryed lotas dump and first time red led blink
              1 short 1 long x 5 times then led off - Only first time after i plug to ac then
              after i press power button red led blink
              2 short x 5 times and repeating.

              need full backup emmc, spi, eprom please

              CPU Samsung DNle SDP19205 ver. 00 TA0Y4400 AS 2018
              RAM winbond W632GG6NB-09
              cFeon Q40B-104GIP near the eth socket
              st 24512fd near the BN9650992A marked with qr code

              Comment

              • Davi.p
                Hobbist Tech
                • Sep 2009
                • 4281
                • Italy - Milan

                #8
                Re: UE32T5370 need eprom dump

                Can exist hardware problems, the set is unable to execute main software i think, this sometimes is due to unability to stay full on by the power supply, check the circuitry around the optocouplers for a turning full on command, it must enable pfc and main stage pwm ic

                Comment

                • lotas
                  Badcaps Legend
                  • Jan 2016
                  • 4513
                  • Russia

                  #9
                  Re: UE32T5370 need eprom dump

                  Originally posted by noname512
                  tryed lotas dump and first time red led blink
                  1 short 1 long x 5 times then led off - Only first time after i plug to ac then
                  after i press power button red led blink
                  2 short x 5 times and repeating.

                  need full backup emmc, spi, eprom please

                  CPU Samsung DNle SDP19205 ver. 00 TA0Y4400 AS 2018
                  RAM winbond W632GG6NB-09
                  cFeon Q40B-104GIP near the eth socket
                  st 24512fd near the BN9650992A marked with qr code
                  Try the second dump from this thread.
                  https://www.badcaps.net/forum/showthread.php?t=115470

                  Comment

                  • noname512
                    Member
                    • Oct 2018
                    • 41
                    • United Kingdom

                    #10
                    Re: UE32T5370 need eprom dump

                    thank you lotas and Davi.p trying that dumps from lotas and the circuitry around the optocouplers saturday and i will report here

                    Comment

                    • noname512
                      Member
                      • Oct 2018
                      • 41
                      • United Kingdom

                      #11
                      Re: UE32T5370 need eprom dump

                      Tryied EN25Q40. Same red blinking led.
                      All voltages seems ok
                      Does enyone have a service manual?
                      Last edited by noname512; 02-26-2023, 02:48 PM. Reason: service manual

                      Comment

                      • didoee
                        Member
                        • Apr 2019
                        • 20
                        • Bulgaria

                        #12
                        10x lotas​ - ok UE32T5372

                        Comment

                        Related Topics

                        Collapse

                        • Habble7
                          I need a BIOS dump for the Samsung S49CG934SU monitor
                          by Habble7
                          The Samsung S49CG934SU monitor does not power on - no LED indicator activity and no response to power button. However, when 21V power is connected, it immediately draws 0.8A of current with no display output. The motherboard processor gets warm, and there is continuous reading activity from the W25Q128BV BIOS chip.

                          Suspected Cause:
                          I suspect the BIOS may have been corrupted during a power interruption while updating the firmware. The official website provides firmware updates, but they can only be installed via USB flash drive.

                          Troubleshooting Attempts:
                          ...
                          05-22-2025, 07:28 AM
                        • Mephysis
                          DUMP DVR HIKVISION DS-7208HGHI-K1 (80389 Rev 1.3 Firmware)
                          by Mephysis
                          Hello guys i really need help, i recently updated my DS-7208HGHI-K1 and it somehow got bricked, I've got it up and working now by flashing a new dump file i found but the serial number is really wrong and the uploader of the dump file probably intentionally did it.

                          I still have the bricked dump file is it possible to transfer the serial number of the "bricked dump" to the "working dump"?
                          03-27-2025, 02:34 AM
                        • hyperwood
                          [REQUEST] 2MB BIOS Dump for Lenovo NM-E471 Rev 2.0 (Winbond 25Q16JWSIQ Chip)
                          by hyperwood
                          Hi everyone,

                          I’m looking for a 2 MB BIOS dump for a Lenovo IdeaPad 5 16ARH7H / Legion 5 with mainboard NM-E471 Rev. 2.0.

                          The BIOS chip is a Winbond W25Q16FW (1.8V, 2MB) and it's completely unresponsive / bricked. I tried recovery via USB but no success. Now I want to reflash it externally using a CH341A programmer.

                          I already found 32MB dumps (e.g. from Vinafix and Badcaps), but they are too large for the chip – and the last 2MB in those files are just FF FF FF....

                          ✅ What I need:
                          • A working 2MB BIOS dump
                          • Matching NM-E471 Rev. 2.0, e.g. JY575
                          ...
                          06-25-2025, 02:28 PM
                        • Andreas_de
                          Power supply Manson NTP-5561 (5661) LCD controller dead - PIC18F87K90 HEX dump required
                          by Andreas_de
                          Hello!

                          i got a damaged Manson NTP-5561 (60V, 1,6A DC output) and and the main issue is that the controler IC for the LCD display has a short. The controler IC PIC18F87K90 is mounted on the back of the back of the LCD. Vss-Vdd = 3 Ohm. The 5V and 3,3V power line was killed as well, but that is not a problem. A new LDO 3,3V and 5V 7805 is already ordered.
                          Replacing the PIC18F87K90 is necessary but that makes no sense without having the HEX dump of the new controler.

                          Does anybody have such a power supply and could do a HEX dump of the Flash and EEPROM memory?
                          ...
                          04-12-2025, 10:38 AM
                        • Buzzfuzz2k
                          Bios password removal on a Unowhy dump
                          by Buzzfuzz2k
                          Hi Everyone,

                          I'm facing a problem with a locked bios with a password and i can't find how to remove it...

                          The small computer is only booting on a M2 ssd Windows partition and i get a "signed partition error" if i try to boot on the same SSD with another Os (linux for example).

                          the Computer is a Unowhy small pc
                          N° UYM6524702229


                          After failling trying to boot on other "none Windows" partition, i wanted to try to remove the bios password.

                          My first attempt was to get the bios dump from windows...
                          11-13-2023, 07:37 AM
                        • Loading...
                        • No more items.
                        Working...