Samsung LN52B550K1F no backlight has picture has sound

Collapse
X
Collapse
 
  • Page of 2
  • Time
  • Show
Clear All
new posts
Previous 1 2 template Next
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12206
    • U.S.
    #21
    Re: Samsung LN52B550K1F no backlight has picture has sound

    testing the inverter boards: https://www.youtube.com/watch?v=oE6K4xBVweA
    https://www.youtube.com/watch?v=b36w2GNrH6Y
    https://www.youtube.com/watch?v=vNIWtrEHYsc
    Quit because THIS SITE LETS A ROGUE MEMBER TYPE ANY GARBAGE HE PLEASES AND THE POWERS THAT BE NEVER DO ANYTHING ABOUT IT SO HE NEVER QUITS. THEN YOU GET A PENALTY FOR RESPONDING TO HIS ATTACKS. BEEN GOING ON FOR WAY TOO LONG. DONE SUPPORTING A SITE THAT ALLOWS THIS BS.

      Comment

      Previous 1 2 template Next

      Related Topics

      Collapse
      • Ierwin
        Samsung UE60KU6079 backlight okay mainboard responsive, no picture, no sound
        by Ierwin
        Hello everyone,
        Ive got a UE60KU6079 on the workbench that is giving me some headaches trying to troubleshoot.
        The previous owner stated that there had been white dots on the screen which from the description sounded like some lenses fell of the backlight LEDs.
        He had opened the TV from the back, trying to get to the backlight, supposedly gave up, reassebled everything and gave the TV to me.
        I expected the worst like ripped COF cables or a cracked panel but could not find anything like that yet.
        Anyway I still fully expect that there has been something seriously damaged...
        05-13-2025, 03:31 PM
      • TR103
        Samsung TV model UE50TU: rebooting, backlight, sound, but no picture
        by TR103
        Hi, I have a Samsung UE50TU with:
        - sound and backlight, but no picture
        - when it arrived, it had a picture for a few seconds
        - it keeps rebooting
        - without ribbon cable between the two panel boards, it does not reboot but I have no picture
        - without cable between mainboard and lcd panel, it does not reboot (but obviously i have no picture)
        - when i try a tape fix, its keeps rebooting, unless I tape off pin 1 (the innermost pin). In that case it does not reboot but I have no picture.

        - without cable between mainboard and lcd panel and with a jumpered...
        01-22-2025, 04:12 PM
      • Mgiffune
        Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
        by Mgiffune
        I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

        I ordered a supposedly ‘new' Tcon board this time, and        ...
        06-09-2024, 10:28 AM
      • gl4709
        Samsung un55cu7000d with backlight and sound No Video / Picture
        by gl4709
        I am working on a Samsung un55cu7000d which has backlights and audio. There is no picture. This model does NOT have a separate TCON board. Before I order a main board I would like to try and confirm that the issue is not in the display. The ribbon cable from the main board goes directly to the display and I can then disconnect the left from the right. When I disconnect the right side the display lights up on one side but has no video being displayed. Can you all give me some guidance on how to confirm the main board is the issue.
        01-23-2025, 06:21 PM
      • LaPCon_IT
        Samsung UE50TU7099U no picture no sound, backlight present
        by LaPCon_IT
        TV has one combo board (VTT55UH160). Symptoms are like this.


        When part of the screen is disconnected (white part), it looks like this

        Resistance and voltages (I don't know if they are good or not). The inductor with 0ohm/0V seems to be connected to GND.


        I haven't noticed any shorts on rails listed below:

        VGH - 30V
        VGL- -9V
        VAA - 14V
        VCOM - 5.6V
        STV - 11.95V
        LC1, LC2 - +30/-12V

        All CKV lines (no shorts between them) looks the same:


        I've tried to cover some lines with...
        7 Photos
        12-15-2023, 03:55 AM
      • Loading...
      • No more items.
      Working...