Panasonic TX-L37dt30B restarting

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sordids999
    Badcaps Legend
    • May 2013
    • 2161
    • uk

    #1

    Panasonic TX-L37dt30B restarting

    Hi
    I have this set which keeps turning off once you play a channel and then gets stuck with a flashing red standby
    But it flashes red every 4 seconds
    I can browse the tv menu options fine without switching off
    It will not turn on again with the remote but using the on off switch is fine
    Voltages seem fine but still testing at the moment
    I'm suspecting a backlight issue but just wondering if anyone else has had this fault before

    Thanks
  • comptek
    Badcaps Veteran
    • Aug 2013
    • 606
    • uk

    #2
    Re: Panasonic TX-L37dt30B restarting

    Could be firmware is corrupt? stay in menu and turn backlights down really low so you can still see a picture and see if anything changes

    Comment

    • lotas
      Badcaps Legend
      • Jan 2016
      • 4841
      • Russia

      #3
      Re: Panasonic TX-L37dt30B restarting

      Code error
      Attached Files

      if you find these attachements useful please consider making a small donation to the site

      Comment

      Related Topics

      Collapse

      • Document Archive
        LCD LED TV Service Menu Codes
        by Document Archive
        ALL LCD LED TV SERVICE MENU CODES

        Service Menu Code with Board Name

        China Universal Board / Jumper Board Service Menu Code
        Changhong Ruba Service Menu Code
        Ecostar LED TV Service Menu Code
        Orient LED TV Service Menu Code
        Haier LED TV Service Menu Code
        TCL LED TV Service Menu Code
        Samsung LED TV Service Menu Code
        LG LED TV Service Menu Code
        Videocon LED TV Service Menu Code
        Supra LED TV Service Menu Code
        Toshiba LED TV Service Menu Code
        Symphony LED TV Service Menu Code
        Veste/ LED TV Service Menu Code...
        10-31-2024, 03:58 AM
      • BigPete
        Panasonic Heatpump Dryer Repair
        by BigPete
        I picked up a Panasonic NH-P70G2, though it would apply to the NH-P80G2, NH-P70G1 and NH-P80G1 models as well, as maybe some other models. This one was coming up with a H86 error. After lots of testing and googling it was an error with one of the thermistors in the condenser area.
        The attached French service manuals is incorrect, TH11 is gray and is a 95k thermistor and TH12 is black and is a 35k thermistor.
        In my case TH12 was bad. I was able to get a 35k thermistor on AliExpress. It's 6mm in diameter.
        Unfortunately the whole machine has to come apart to fix it.
        I have...
        11-01-2025, 06:40 PM
      • Andre Gilbert
        Panasonic TC-P55ST50 8 blinks then no blinks
        by Andre Gilbert
        Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
        Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

        TV Model: Panasonic TC-P55ST50
        ...
        11-20-2024, 08:52 PM
      • Mark01
        Dell Optiplex 7490 AIO - red power led after flash
        by Mark01
        Hi guys,

        This is my first post! 🚀
        I have no idea what I’m doing, but I’m learning by trial and error.

        I’m currently working on a Dell Optiplex AIO 7490—one of a bunch of AIOs that mysteriously failed to POST just a few days after the warranty expired. The original issue was that the PC worked fine until it was rebooted, after which it got stuck on a black screen (no backlight), with fans spinning at normal speed and a solid white power LED. Forcing it off by holding the power button would just cause it to switch on automatically and get stuck again on...
        07-04-2025, 12:54 PM
      • YellowJacket
        LG 42LN5400 - restarts every 10 sec
        by YellowJacket
        Hello everyone,

        I would like to ask for a little help with this TV. It belongs to friend of mines and he said, the TV is restarting. He uses TV only with HDMI as input.
        When I power it up without any video source, it actually works fine - I can see LG logo turning around with "no signal" label, I can browse settings, etc. I tried to hooked up HDMI cable from my computer, and it works fine too ( tested only short time, like 5 min ). But when I connect a USB flash drive, it restarts almost directly every 10 seconds. All voltages looks stable, both on power board and...
        02-25-2023, 06:12 AM
      • Loading...
      • No more items.
      Working...