Sony 55X8500E no power

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nomoresonys
    Badcaps Legend
    • Jan 2013
    • 12146
    • U.S.

    #21
    Re: Sony 55X8500E no power

    can test the tcon fuse, but seems like mainboard issue because of result in post 13, according to that manual, see that flowchart.

    Comment

    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12146
      • U.S.

      #22
      Re: Sony 55X8500E no power

      do you have any voltages at all on the mainboard?

      Comment

      • wumeow
        Member
        • Dec 2022
        • 15
        • UK

        #23
        Re: Sony 55X8500E no power

        Originally posted by lotas
        The zener diode is in parallel with low-resistance resistors, so it seems to you that it is short.
        That's right, thanks.

        Comment

        • wumeow
          Member
          • Dec 2022
          • 15
          • UK

          #24
          Re: Sony 55X8500E no power

          Originally posted by nomoresonys
          in some cases you need to jump power-on, bl-on, and maybe all the pwm pins to stndby to get the backlights on.
          Are they all jump with 1K resistor?

          Comment

          • wumeow
            Member
            • Dec 2022
            • 15
            • UK

            #25
            Re: Sony 55X8500E no power

            Originally posted by nomoresonys
            do you have any voltages at all on the mainboard?
            I did follow the flow chart on the service manual. but not sure what is the root cause.

            Getting 0V on both R441 and R527, which suggest IC401 is faulty. At the same time, I also get 0V on C400-C412.

            Would you shed some light please? Thank you.

            Comment

            • nomoresonys
              Badcaps Legend
              • Jan 2013
              • 12146
              • U.S.

              #26
              Re: Sony 55X8500E no power

              Originally posted by wumeow
              Are they all jump with 1K resistor?
              yes I think 1k should work.

              Comment

              • nomoresonys
                Badcaps Legend
                • Jan 2013
                • 12146
                • U.S.

                #27
                Re: Sony 55X8500E no power

                Originally posted by wumeow
                I did follow the flow chart on the service manual. but not sure what is the root cause.

                Getting 0V on both R441 and R527, which suggest IC401 is faulty. At the same time, I also get 0V on C400-C412.

                Would you shed some light please? Thank you.
                mainboards are tough because of how many ways they can go bad and how hard they are to work on, I spent several hours and money on components trying to fix my sony mainboard a few months ago but failed miserably.

                Comment

                • nomoresonys
                  Badcaps Legend
                  • Jan 2013
                  • 12146
                  • U.S.

                  #28
                  Re: Sony 55X8500E no power

                  maybe check out Nick's tv on youtube, hes a tv fixing maniac.

                  Comment

                  • davidpringle
                    New Member
                    • Sep 2017
                    • 5
                    • uk

                    #29
                    Re: Sony 55X8500E no power

                    Did you replace ZD905

                    Comment

                    Related Topics

                    Collapse

                    • Tynan Dill
                      Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
                      by Tynan Dill
                      I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

                      Upon bringing it home and plugging it up, it showed a standby light.

                      I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

                      The screen seems to blackout and stay black, but with a flashlight I can see the display.

                      With my Playstation 4 connected via HDMI, and running a game I can hear sound.

                      Assuming...
                      11-22-2024, 01:46 PM
                    • PantherDave
                      Microsoft Surface Pro (5th gen) model 1796 - no power
                      by PantherDave
                      Hi all!

                      I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

                      I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
                      https://www.badcaps.net/forum/troubl...-hardware-devi...
                      05-29-2024, 02:01 PM
                    • GLISIT
                      Asus Probook P5440UF-XB74 power issue
                      by GLISIT
                      Hi all,

                      TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


                      I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

                      A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
                      01-16-2025, 02:29 PM
                    • PopsCaps
                      Sony Bravia KDL-40V2500 that will not power on
                      by PopsCaps
                      I have a Sony Bravia KDL-40V2500 that will not power on. The indicator flashes red 3 times.
                      I do not hear any sound and I cannot see any backlight.
                      I have tried disconnecting every cable on each board one at a time to see if anything changes.
                      The only change is when I disconnect AC-DET cable on the Power Supply board or on the other end if I unplug the CN7009 connection on the B-Board and try to power on the TV the indicator will stay on solid green until I power off.
                      My friend ordered another used power supply board but it is also doing the red indicator flash 3 times...
                      03-25-2025, 11:23 AM
                    • sam_sam_sam
                      Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
                      by sam_sam_sam
                      I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

                      One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
                      03-31-2024, 02:12 PM
                    • Loading...
                    • No more items.
                    Working...