M19DIGB19 Matsui TV ,PSU component ID help please

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • zen
    Badcaps Veteran
    • Apr 2011
    • 511
    #1

    M19DIGB19 Matsui TV ,PSU component ID help please

    Hi all

    Have been here before but ended up replacing PSU .

    This time doesn't seem to be one available .

    Require type for the 6 legged device U3


    Can anyone help ( see pictures )
    Attached Files
    Tags: None
    • zen
      Badcaps Veteran
      • Apr 2011
      • 511
      #2
      Re: M19DIGB19 Matsui TV ,PSU component ID help please

      Gotcha , anyone ordered from yocart.com before ?
      Attached Files

        Comment

        • lotas
          Badcaps Legend
          • Jan 2016
          • 4558
          • Russia
          #3
          Re: M19DIGB19 Matsui TV ,PSU component ID help please

          Ld7535abl

            Comment

            • Repdata
              Senior Member
              • May 2020
              • 67
              • Deutschland
              #4
              Re: M19DIGB19 Matsui TV ,PSU component ID help please

              Take a look at the electrolytic capacitors, they are all defective and one has even leaked

                Comment

                • zen
                  Badcaps Veteran
                  • Apr 2011
                  • 511
                  #5
                  Re: M19DIGB19 Matsui TV ,PSU component ID help please

                  Thanks Lotas

                  Hi Repdata , yes will check through them also

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Nevillet
                      Identifying a 3-legged device
                      by Nevillet
                      Hi All,

                      I have a small Sony CD player (CMT-X3CD) where the PSU board has died but i'm having trouble identifining a fried 3 legged component labled as Q501 on the schematic. The marking on the device itself is terrible and all I can decifer is:
                      25216
                      SMK

                      Can anyone suggest what it can be replaced with?

                      I've attached the service manual and the PSU board can be found on page 36/7.

                      Many thanks.
                      https://www.badcaps.net/forum/attach...1&d=1696416404

                      ...
                      10-04-2023, 04:50 AM
                    • drykid
                      Matsui 175S microwave fuse replacement
                      by drykid
                      Hi,

                      I recently picked up a used Matsui 175S microwave that was powering up (starts, turntable rotates) but not heating. From looking online the most likely culprit was the fuse, but unfortunately in this one the fuse had heated up and fused with the (badly designed) fuse holder and couldn't be removed. I guess this might indicate further issues beyond the fuse itself but at this stage I just want to replace the fuse and see how I go from there.

                      Anyway since I couldn't get out the fuse itself the easiest fix was to replace the fuse holder assembly that runs between the...
                      12-21-2020, 01:15 PM
                    • rddube
                      Need help identifying a 14 legged chip with no marking
                      by rddube
                      Hello everyone,

                      I need help trying to diagnose the problem with this little board which controls the activation of a motor for a mini Liion powered chopping apparatus. The motor is rated 7.4 volts and should start when you power the power switch twice, but I only get a led flashing.

                      The chip I think may be at fault is the one pointed by the yellow arrow, but there no markings on it at all, nothing!

                      Any help would be appreciated. Many thanks!...
                      02-05-2022, 09:26 PM
                    • hugocarmo
                      Grundig GV-250 Repair problem. (Video inside post)
                      by hugocarmo
                      Hi everyone.
                      I have the following problem.
                      I have a Grundig GV-250 VCR which has not been used for over 10 years. When I turned it on, the fuse of the PSU burned out, after being replaced it burned again, I ended up verifying that I had the bridge rectifier and the mosfet in short, I ended up replacing it, and I replaced all the electrolytics of the PSU. However, it started to behave strangely, as I will show you in the video that I will attach as a link.
                      In short, I ended up replacing all the ICs on the power supply CNY17G, TDA4605, TL431, TDA8137, TL082CP, AN3824K, L2720,...
                      01-19-2023, 06:46 AM
                    • Lexsmash85
                      legion y540 15irh (81sx) problem
                      by Lexsmash85
                      Hi, I'm Alex from California,I'm a musician and gamer.

                      So, i have a Lenovo legion y540 15irh (81sx). 9th gen i7 ... It originally was on windows 10 when i got it, and apparently the bios boot mode was set to legacy mode.

                      Well, a few years after warranry ended, and apparently Lenovo recently ended service and updates for this, my keyboard randomly stopped working, but intermittently,

                      Refreshing windows 10 didnt help. I managed to safely change over the boot mode from legecy to UEFI, i updated to windows 11, but keyboard issues continued.

                      It would...
                      06-28-2025, 04:11 AM
                    • Loading...
                    • No more items.
                    Working...