Hi everyone I have a plasma here that is absolutely dead no power light. When I press the power button the relays click the fan spins for a second then it's dead and nothing happens on the screen. Anyone have any suggestions?
Announcement
Collapse
No announcement yet.
Panasonic TC-P50G10 DEAD
Collapse
X
-
Re: Panasonic TC-P50G10 DEAD
worth a read of this thread
https://www.badcaps.net/forum/showth...onic+TC-P50G10
Comment
-
Re: Panasonic TC-P50G10 DEAD
Originally posted by Super360 View PostWell it appears I can spend $200 on a used good sc board or spend like $70 on a repair kit for the sc board. I think I will just have to throw in trash if not economical to repair.
Comment
-
Re: Panasonic TC-P50G10 DEAD
Not totally e-waste, you can disconnect the SC board and test if everything else works, remove the cable from P-Board to SC and the flat from A-board to SC, it should come on with no image but green light, VSUS, Vda and VE on the SS board.
The A board has some value plus the power supply.
Comment
-
Re: Panasonic TC-P50G10 DEAD
If it helps; here is the service manual for it:
http://www.sm.azhand.co/ServiceManua.../TC-P50G10.pdf
It's actually impressively comprehensive.
Comment
Comment