Vestel Back light change,marked as A. B & C

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • josweet
    Member
    • Nov 2015
    • 17
    • UK
    #1

    Vestel Back light change,marked as A. B & C

    Im changing the backlights on a TV which has already been stripped by someone else.
    The new replacement backlights have arrived & are marked as A. B & C .. However i have no way of knowing if i have to put them in a specific order.

    Can someone tell me what A,.B & C represent on LED TV back lights.
    For reference, the Tv is a Hitachi 42"
    Last edited by josweet; 12-22-2021, 04:39 PM.
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: Back light change

      It will be a little easier with a model number and photos.

        Comment

        • captainKKK
          Badcaps Veteran
          • Sep 2018
          • 287
          • United States
          #3
          Re: Back light change

          I got a guess. If they are all physically alike with the same number of leds on each, then it makes no difference.

            Comment

            • ducky29
              Badcaps Veteran
              • Dec 2015
              • 370
              • Europe
              #4
              Re: Back light change

              It must be a vestel set. abcba must be the order. The order it is also engraved in the metal.

                Comment

                • josweet
                  Member
                  • Nov 2015
                  • 17
                  • UK
                  #5
                  Re: Back light change

                  Originally posted by ducky29
                  It must be a vestel set. abcba must be the order. The order it is also engraved in the metal.
                  Thankyou,
                  I put the TV away over Christmas. Ill update once we're back to normality.

                    Comment

                    • josweet
                      Member
                      • Nov 2015
                      • 17
                      • UK
                      #6
                      Re: Back light change

                      I noticed today that the Led strips A and C at first glance look the same, however the LED positions are slightly offset by about 5mm. This im guessing is what must differentiate between them.

                        Comment

                        • alfatv
                          Badcaps Veteran
                          • Sep 2020
                          • 353
                          • Canada
                          #7
                          Re: Back light change

                          Originally posted by josweet
                          I noticed today that the Led strips A and C at first glance look the same, however the LED positions are slightly offset by about 5mm. This im guessing is what must differentiate between them.
                          You can verify correct placement with reflector sheet

                            Comment

                            Previous template Next

                            Related Topics

                            Collapse
                            • sam_sam_sam
                              Lift Master Garage Door wall switch display / motion sensor controller display disappeared no back light
                              by sam_sam_sam
                              This happened last Saturday and today I finally had time this morning before I went to work to replace two non brand capacitors

                              I will let you be the judge weather or not these are bad or not according to the blue ESR meter that I am using

                              I am comparing them to a brand new one that I installed

                              The display came back on and the programming was not lost which I was surprised by I would have thought that when the display went blank that so did the memory as well

                              I going to let it run for several days before I remount back on the wall next to the...
                              09-05-2024, 06:48 PM
                            • PNI E.
                              tcl u65x9006 back light on but no picture sounf ok after 40 50 secs
                              by PNI E.
                              hi guys, i need your help again...i have tcl u65x9006. while i was watching it become darker like when a movie ends, little by little the image disappear. now if i turn on i have back light on, after like 1 min i have also sound but no picuture. the back light is on i take off one at time the ldvs but nothing change always no picture. i tried to cover with a piece of paper the pin of ldvs i cover like 7 8 pins but nothing worked. the tv stay with no picture. there is a tcon board.i checked the voltage there on the fuse i have 11,8 volts. there is caps in shorts on the exit of the tcon i have...
                              02-20-2025, 08:36 AM
                            • boyebaran
                              hisense 65k560 back light problem
                              by boyebaran
                              hi to all
                              tv turn on and show logo(backlight on)than backlight turn off than red led in front blinking 7 time. the tv remote control working fine (sound on no picture).backlight changed same problem
                              in 65k560 how to remove protection of backlight? picture of inverter and sockets attached .
                              please advise me tnx
                              4 Photos
                              05-20-2025, 07:11 AM
                            • howardc64
                              A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                              by howardc64
                              Problem

                              This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                              08-04-2024, 10:36 PM
                            • Document Archive
                              HP ProDesk 600 G5 + APC Back-UPS 700VA ProDesk 600 i5-9500 Specification for Upgrade or Repair
                              by Document Archive
                              This specification for the HP ProDesk 600 G5 + APC Back-UPS 700VA can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ProDesk 600 G5 + APC Back-UPS 700VA boardview and ProDesk 600 G5 + APC Back-UPS 700VA schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties...
                              09-12-2024, 02:30 PM
                            • Loading...
                            • No more items.
                            Working...