Samsung LCD TV no picture backlight on no 12v at tcon

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • shelby5041
    Badcaps Legend
    • Feb 2009
    • 1505
    • united states of america usa
    #1

    Samsung LCD TV no picture backlight on no 12v at tcon

    hi
    i have a samsung lcd tv

    it powers on with sound and backlight but no picture

    all voltages from PS are good 12v 3.3v and 5v

    whats odd is that at the tcon i tested voltage across the fuse on the tcon and i get 0v

    i figured main board issue..so i ordered a used main board....when i put replacement main board in i still have same issue

    no 12v at the tcon fuse

    i disconnect the panel ribbon cables to rule out any panel issues and i still have no 12v at the tcon fuse

    the odds of having 2 main boards with exact same problem is rare but could happen

    could this actually be a bad tcon board? ..maybe is shorted out and not allowing main board to send the 12v?..or is this not a possibility.

    thank you
    Tags: None
    • shelby5041
      Badcaps Legend
      • Feb 2009
      • 1505
      • united states of america usa
      #2
      Re: Samsung LCD TV no picture backlight on no 12v at tcon

      i think issue may actually be tcon...if i remove the tcon cable from the main board i now have the 12v at main board check point....so maybe tcon is shorted out which causes to lose 12v at main board to tcon?

        Comment

        • shelby5041
          Badcaps Legend
          • Feb 2009
          • 1505
          • united states of america usa
          #3
          Re: Samsung LCD TV no picture backlight on no 12v at tcon

          It was faulty tcon causing main board to shut 12v off

          Replaced tcon ..$8...now works great

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Asraf Atb
              Help Needed: Samsung UE55MU8000 Dead - Possible Main Board Issue
              by Asraf Atb
              Hi everyone,

              Im looking for some advice regarding my Samsung UE55MU8000 TV with main board model BN94-11606C. The TV suddenly stopped turning on and now shows no signs of life at all not even the standby light at the bottom.

              Initially, I suspected an issue with the PSU, so I took it to a repair center. They tested it and confirmed that the PSU works perfectly, even on other TVs. Based on that, I started investigating the main board.

              I disconnected the main board from the PSU, and the backlight turned on, which seems to confirm the main board is the issue....
              1 Photo
              01-27-2025, 05:02 PM
            • ygorsan
              LG 55NANO77SRA TV ā€“ Menu scrolling by itself even after removing button board (Main Board EBU66792103)
              by ygorsan
              Hi everyone,




              Iā€™m looking for help with a persistent issue on an LG TV model 55NANO77SRA, which uses the main board EBU66792103 (also used in LG UQ80 and NANO75/NANO80 series).







              šŸ§© Problem Summary:
              • The TV keeps scrolling through the menu or selecting items by itself.
              • I removed the physical button board (the entire panel with power and volume buttons) and also disconnected the flat cable (CN202) from the main board.
              • The remote control is not in use (batteries removed), and the TV still shows the same behavior.
              • I
              ...
              07-28-2025, 08:34 AM
            • Lee M.
              Samsung UN75RU8000FXZA bad main board?
              by Lee M.
              When plugged in it will click and cycle the BL on and off, no pic and does not respond to remote. When I disconnect the cable from the PS board to the main board and then plug it in the BL will come on and stay on. There are only two boards in this set, the LVDS cables from the panel driver boards connect directly to the main board. Since the BL comes on and stays on I'm thinking the PS board is ok and the problem is on the main board. Should I order another main board or do I need to do more testing? thanks, Lee
              11-08-2023, 07:46 PM
            • m1ch43lzm
              HP Pavilion 15-eh Board DAG7HAMB8F0 - CPU throttling to 0.4GHz (PROCHOT_EXT) and black screen
              by m1ch43lzm
              Hi, this is my personal laptop, which the original board (lets call it Board A) blew up PU8700 (TPS51486), making a hole on the board, i had left the laptop at my desk one day with the battery fully charged and didn't touch it for a week, but when i tried to turn it on it didn't
              Thought the battery was dead, so i plugged in the charger then tried to power on, the power LED blinked once, charged LED still orange, unplugged the charger, plugged in again and I noticed the "magic smoke" smell, so i unplugged the charger, removed the back cover and saw the blown IC (the "magic...
              05-12-2025, 08:37 PM
            • cheeky2
              Is it possible to upgrade from a Vestel 17MB97 main board to a 17MB110 Main board?
              by cheeky2
              I suppose the real question is whether the existing pinouts from ether a 17IPS71 psu are cross compatible with a 17IPS12 psu? If they are then the exchange of the main boards should have no issues providing the screen is compatible with both main boards. Obviously you can change the screen configurations easily enough (providing you have the correct files) for the main board. Why may you ask would I do this? Well a lot of the smart features are no longer working on a Hitachi 48HBT62U main board I wish to give it a new lease of life!
              Obviously the same LVDS connector for the screen connection...
              05-25-2024, 03:27 AM
            • Loading...
            • No more items.
            Working...