Hi all I'm new here. An old tv tech from the tripler and crt days.
Just got given a dead panasonic TH55ds610 so thought I would have a go. Symptoms, starts up, get a flash of a menu on the screen for a second
does it again and then shuts down. when I connect a dvd player the sound also works for a second and also a flash of a picture before it shuts down.
Took the back off and suprised how small the electronics are.
Anyway to cut a long story short, found 3 mosfets (out of a set of eight)on the led driver board all s/c emitter to collector.
So I am trying to source these components.Have checked as best I can for other shorts on the board, seems ok.Do you think replacing these will sort the problem?
Also how come the heatsinks of these mosfets have warnings "Danger High voltage" when they seem to be connected to chassis ground? Appreciate any insight
Just got given a dead panasonic TH55ds610 so thought I would have a go. Symptoms, starts up, get a flash of a menu on the screen for a second
does it again and then shuts down. when I connect a dvd player the sound also works for a second and also a flash of a picture before it shuts down.
Took the back off and suprised how small the electronics are.
Anyway to cut a long story short, found 3 mosfets (out of a set of eight)on the led driver board all s/c emitter to collector.
So I am trying to source these components.Have checked as best I can for other shorts on the board, seems ok.Do you think replacing these will sort the problem?
Also how come the heatsinks of these mosfets have warnings "Danger High voltage" when they seem to be connected to chassis ground? Appreciate any insight
Comment