TCL u55p6006 no backlight

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • wylcot
    Member
    • Dec 2020
    • 29
    • France
    #1

    TCL u55p6006 no backlight

    So someone left me a TCL u55p6006 with no backlight.

    I can see the image is on with a lamp, and it actually flickers once when switching it off.

    I guess it's usual issue of dead leds, so I was wondering how I could check which ones are the faulty ones.
    Is there any good tutorial on how to do it? Which led tester should I buy if any?

    Thanks in advance.
    Tags: None
    • neilc6
      Badcaps Legend
      • Nov 2015
      • 1550
      • Canada
      #2
      Re: TCL u55p6006 no backlight

      Replace all the strips with new and turn down the backlight level. All the LEDs have wear and the working ones will likely fail

        Comment

        • wylcot
          Member
          • Dec 2020
          • 29
          • France
          #3
          Re: TCL u55p6006 no backlight

          Oh !
          All of them ?!
          Okay...

            Comment

            Previous template Next

            Related Topics

            Collapse
            • triplefour
              UN65TU700DF picture and sound but no backlight. BL tests ok but repl. PSU didnt fix!
              by triplefour
              this tv is throwing me for a loop. do samsung tvs no longer have the backlight self test feature built into the power supply?
              i tested the backlight with my LED tester and it lights up both strips. one of them reads 100v and the other reads 63.7v.
              unplugged mainboard from power supply but left backlight plugged in, and then plugged psu wall power in. expected to see backlights light up but see nothing.
              according to how ive diagnosed in the past, this would almost always be a bad power supply. replacement power supply was cheap like 20$ from ebay. but still i get not even...
              09-13-2023, 10:43 PM
            • hollox123
              ASUS ROG Strix G713QR - Keyboard, backlight and side LEDs don't work
              by hollox123
              Hello, I have an "ASUS ROG Strix G713QR" laptop, and for approx. 3 months I have the following problems:

              1. Laptop keyboard doesn't work
              2. The backlight on the laptop keyboard doesn't work
              3. The x2 side LEDs (red) on the laptop don't work

              The power button works, the touchpad works, and all the USB, HDMI, Ethernet, etc. ports work.

              I already tried to reinstall all the drivers and reinstall Windows. So I don't know what to try anymore that is software-related.

              But I am strongly aiming that it is somehow a BIOS-related problem,...
              05-11-2025, 08:05 AM
            • signal.quest
              Panasonic LED TV TC-40A420U - Replaced Backlight LEDs but now no image/display or garbled
              by signal.quest
              I have a Panasonic LED TV TC-40A420U. The TV was given to me as an attempt to fix or throw out. I replaced the Backlight LEDs and now the screen lights up, but there is no image/display. If I play with the up/down buttons I can get the display to change from black to garbled. I can't get sound from HDMI but not sure of what input is selected. I have no remote control. When I connect a laptop to the HDMI ports it recognizes a Panasonic TV for display and sound output but I can't see or hear anything through the TV. This makes me think the mainboard is OK, but not sure if mainboard can...
              2 Photos
              03-17-2024, 10:14 AM
            • DanPoka
              Guide me through repairing a Dell p2210f LCD ccfl backlight monitor
              by DanPoka
              I bought this p2210f dell monitor to fix. Schematic is the same as p2210.
              Behaviour is that monitors comes on but then backlight switches off almost instantly. If I look with flashlight I can still find the "No signal message". So definitely a backlight issue. Trying to advance the issue I proved that the protection circuit is switching off the backlight by shorting out C3 and resistor to disable the INL chip then re enable by removing the short.
              This is where it gets interesting. When I disassembled the monitor to solder leads on c3 capacitor I noticed the backlight flickered...
              02-15-2025, 05:05 AM
            • Comp_Pro
              No Backlight Macbook A1990 820-01041
              by Comp_Pro
              Hello all,

              Am trying to figure out this backlight issue with this A1990 Macbook Pro.

              Tests performed:

              There is no backlight even with a good screen.
              Backlight IC is receiving the correct support voltages.
              Fuse F8400 ok
              Current sense resistor R8400 ok
              Backlight IC is receiving 3.3V on enable pin.
              Backlight IC receiving voltage from PPBUS_G3H, aprox 12.5V.
              Backlight IC receiving 5V from PP5V_G3S
              Backlight IC BKLT_SCL and BKLT_SDA both measure 0.545V diode mode to ground
              I2C_BKLT_SCL and I2C_BKLT_SDA both measure...
              05-06-2024, 10:23 PM
            • Loading...
            • No more items.
            Working...