I just assembled my LG tv after Led strip changing bit it looks i put the diffusers sheets in wrong order as the picture is a bit darker staying in front of the tv. If somebody can help with this order as i am going to disassemble it again now. Thank you.
-
Picked this one up today.
In addition to falling LED diffusers there is a single line here that maybe a deal breaker.
From my reading on these boards it is said that the issue is likely a sign of failed tab drivers, ribbons or tab bonding to the panel.
Wanted to get a 2nd opinion from you guys before I gave up the ghost.
Great looking TV otherwise.
Is there any tricks I can do to try to save this one?
If so, i'll gladly order a set of backlights and save this one from the landfill..
Thanks in advance
... -
Hello! I am trying to figure out order of memory banks on gtx 950 card. There are 4 chips in total, 2 in front and 2 on back side of card. Mods is giving me error on A0 and I am not sure which is that...i marked my idea what should be right order but if anyone can confirm or correct me that would be great. Thanks!... -
Hey guys,
I am new to the electronics repair game & have stumbled into some tools to get my workshop (garage) started.
I managed to get my hands on a low budget multi-meter, soldering iron, de-soldering gun, oscilloscope and a variable voltage/amperage DC power supply.
With this being a new hobby i am thinking of investing in some tools to make it a little easier.
When i get paid next i was thinking of buying a Peak Atlas ESR 70 gold.
I am after suggestions on what order to buy things because i don't have the money... -
Hello
After checking this resistor which gives no value on the ohmmeter on a PS4 SLIM power supply.
I would like to change it but by which power I can choose it knowing that this resistor is on the primary part that is to say on the 230/400 V side
Value 16.8 Ohm normally according to color code (See photo)
1st ring = Brown = 1
2nd ring Blue = 6
3rd ring Grey = 8
4th ring OR Multiplier = x0.1 Ohm
5th ring Red = +/- 2 %.
Tolerance of either + or - 0.336 ohms
Dimension of the resistor Length = 6.4mm,... -
LED Solar Flood Light Dusk to Dawn Security Wall Street Yard Outdoor Lamp modifications are in orderI bought one about a month ago from an eBay seller who now is out of stock however I found another eBay seller that has the same version of this device so I think about buying a few more of over a period of time
Awhile back I bought some A123 brand 18650 battery cells that are 3.2 volt battery cells that I am going to use in this device for more running time in a florescent bulb fixture that I gutting out the tube sockets and turn it into a solar powered LED lighting fixture instead
Pictures will come later when I have the lighting fixture gutted and have the battery...
Comment