Not able to power on, 6 blinks.
Tested the backlight OK with backlight tester. The problem is the 4 series resistors R602A-D values increased. Looks like everyone is possible to change values.
I jumped the R602D (it's underneath the heatsink) with a wire (on the other side of the board) fixed the problem.
Tested the backlight OK with backlight tester. The problem is the 4 series resistors R602A-D values increased. Looks like everyone is possible to change values.
I jumped the R602D (it's underneath the heatsink) with a wire (on the other side of the board) fixed the problem.
Comment