Re: 42PFL7406 No Power
OK, so running the power supply board by itself and use force on the PFC Boosted Voltage is present and did not drop out.
3.3V standby Voltage is present and steady as reported earlier by OP.
12V is steady?
24V is steady?
If they are all the steady, then the next step is to force on the backlights circuit.
Originally posted by trunks81
View Post
3.3V standby Voltage is present and steady as reported earlier by OP.
12V is steady?
24V is steady?
If they are all the steady, then the next step is to force on the backlights circuit.
Comment