Sony KDL-40S4100 horizontal image tearing on right half of screen

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kevin.st56
    Member
    • Sep 2016
    • 22
    • United states

    #1

    Sony KDL-40S4100 horizontal image tearing on right half of screen

    hi all. i have a sony bravia 40in tv, the image on it will produce 3 horizontal lines, and the image overlaps itself, and itll happen when the tv has been turned off for some time. also, on rare occasion, there will be no image at all. with the tearing, it will eventually clear itself up when its been on for maybe 5-10 minutes, and all is good from there, until its turned off for a while, or power is removed. the lines are more noticable with darker images.

    a side note, there is also no standby light when the tv is off, but i havent been too concerned about it since the tv turns on and off without it, by button and remote.

    so far, i have already replaced the TCon board, and the main board.
    Attached Files
  • R_J
    Badcaps Legend
    • Jun 2012
    • 9535
    • Canada

    #2
    Re: Sony KDL-40S4100 horizontal image tearing on right half of screen

    That looks like a panel tab bond problem. Does the POWER led light when the tv is on?
    Last edited by R_J; 05-15-2020, 11:15 AM.

    Comment

    • kevin.st56
      Member
      • Sep 2016
      • 22
      • United states

      #3
      Re: Sony KDL-40S4100 horizontal image tearing on right half of screen

      Yes, power light is lit green when tv is on

      Comment

      • nomoresonys
        Badcaps Legend
        • Jan 2013
        • 12141
        • U.S.

        #4
        Re: Sony KDL-40S4100 horizontal image tearing on right half of screen

        Maybe try the "cutoff tape" method, example there: https://www.youtube.com/watch?v=j7vl7-vZEL8

        Comment

        • budm
          Badcaps Legend
          • Feb 2010
          • 40746
          • USA

          #5
          Re: Sony KDL-40S4100 horizontal image tearing on right half of screen

          LCD panel issue with bad Gate drive which causes the double images you see on the screen, try tape off method as suggested.
          Never stop learning
          Basic LCD TV and Monitor troubleshooting guides.
          http://www.badcaps.net/forum/showthr...956#post305956

          Voltage Regulator (LDO) testing:
          http://www.badcaps.net/forum/showthr...999#post300999

          Inverter testing using old CFL:
          http://www.badcaps.net/forum/showthr...er+testing+cfl

          Tear down pictures : Hit the ">" Show Albums and stories" on the left side
          http://s807.photobucket.com/user/budm/library/

          TV Factory reset codes listing:
          http://www.badcaps.net/forum/showthread.php?t=24809

          Comment

          Related Topics

          Collapse

          • noisykid
            Sony XBR-85X950G Gray horizontal lines and vertical picture shift diagnosis?
            by noisykid
            5.5 year old 85 inch Sony Bravia X950G started showing gray horizontal lines across the bottom of the screen and the picture shifts slightly vertically when it happens. The lines sometimes get bigger/smaller vertically and bounce back. See the video for the problem. It seems to be happening after it warms up after an hour or so. Happens regardless of source. Right now there's nothing but power cable connected and it's happening. We did hook up a new Nintendo Switch to our HDMI switching receiver today, and played for a while with no issues, but this problem didn't occur til a few hours later while...
            12-30-2024, 07:15 PM
          • domix
            Sony KD - 65XF9005 - No image, sound OK
            by domix
            Hello,
            at tv KD - 65XF9005 i have a problem.
            Afrer a coupe of minutes (10-30) i got black screen, no image. But i have sound.

            is this a common problem for this tv?

            i attached pictures of inside. Supply board looks okey, no blowed caps....
            07-21-2025, 06:37 AM
          • Document Archive
            HP Elite Slice G2 + Image Load & Asset Tag Elite Slice i5-7500T Specification for Upgrade or Repair
            by Document Archive
            This specification for the HP Elite Slice G2 + Image Load & Asset Tag can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the Elite Slice G2 + Image Load & Asset Tag boardview and Elite Slice G2 + Image Load & Asset Tag schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please...
            09-12-2024, 02:20 PM
          • Dreamcazman
            Sony KV-XJ29M31 CRT TV - Very dim image on turn on
            by Dreamcazman
            Hi all, I recently picked up a Sony KV-XJ29M31 CRT TV (BG3R chassis, Australian model) cheaply & completed the RGB mux mod on it for some retro gaming. That worked great, however, I have another problem which I hope someone can help me with or at least steer me in the right direction.

            Basically, the issue is when it's cold, it takes a while (like 2 mins) for the picture to come up. I think the image is there, it's just very dark or dim. I can hear the degaussing sound & I can change inputs & hear audio but no image.

            Once it's running properly, it keeps...
            02-28-2022, 07:47 PM
          • x_orange90_x
            Sony KD-60X690E 6 Blinks, no image
            by x_orange90_x
            I just got this today and it has the infamous 6 blink code. I've read it's quite possibly bad backlights, and I intend to check them soon. However, I was just curious if the Sony logo should it's shouldn't be appearing briefly between powering on and the light starts flashing. I've read at least one other person had the logo flash quickly, but mine does not show anything at all, not even a flicker. The green light comes on and after about 5 seconds the red light flashes. So I'd expect in this 5 seconds to see the logo. This leads me to believe it could be a power supply issue.

            I...
            12-10-2024, 09:10 PM
          • Loading...
          • No more items.
          Working...