hi all. i have a sony bravia 40in tv, the image on it will produce 3 horizontal lines, and the image overlaps itself, and itll happen when the tv has been turned off for some time. also, on rare occasion, there will be no image at all. with the tearing, it will eventually clear itself up when its been on for maybe 5-10 minutes, and all is good from there, until its turned off for a while, or power is removed. the lines are more noticable with darker images.
a side note, there is also no standby light when the tv is off, but i havent been too concerned about it since the tv turns on and off without it, by button and remote.
so far, i have already replaced the TCon board, and the main board.
a side note, there is also no standby light when the tv is off, but i havent been too concerned about it since the tv turns on and off without it, by button and remote.
so far, i have already replaced the TCon board, and the main board.
Comment