Re: LG 50PJ350 plasma blowing Y-Sustain board
I actually have 2 Y Sustain boards, the original and one that someone gave me that was also in need of repair. I have the exact same symptoms with both boards and also with a 2nd set of buffer boards. So unless both have the same problem, I'm thinking bad panel or Z Sustain. But what I'd like to know is if it's normal for the Sus_Dn section heat sink to run so hot.
I actually have 2 Y Sustain boards, the original and one that someone gave me that was also in need of repair. I have the exact same symptoms with both boards and also with a 2nd set of buffer boards. So unless both have the same problem, I'm thinking bad panel or Z Sustain. But what I'd like to know is if it's normal for the Sus_Dn section heat sink to run so hot.
Comment