Sharp LC-46x20e error code

Collapse
X
Collapse
+ More Options
Posts
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • nick_rusev
    Member
    • Aug 2016
    • 10
    • Bulgaria
    #1

    Sharp LC-46x20e error code

    Hi all... Please help me understand the error code

    https://streamable.com/76nft5
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12087
      • U.S.
      #2
      Re: Sharp LC-46x20e error code

      IS that an error code?? what are your symptoms when you try/turn on the tv?

        Comment

        • nick_rusev
          Member
          • Aug 2016
          • 10
          • Bulgaria
          #3
          Re: Sharp LC-46x20e error code

          With button on TV green power light comes on but no picture or sound after 20-30 seconds blinking... With remote cannot power off...

            Comment

            Previous template Next

            Related Topics

            Collapse
            • Document Archive
              LCD LED TV Service Menu Codes
              by Document Archive
              ALL LCD LED TV SERVICE MENU CODES

              Service Menu Code with Board Name

              China Universal Board / Jumper Board Service Menu Code
              Changhong Ruba Service Menu Code
              Ecostar LED TV Service Menu Code
              Orient LED TV Service Menu Code
              Haier LED TV Service Menu Code
              TCL LED TV Service Menu Code
              Samsung LED TV Service Menu Code
              LG LED TV Service Menu Code
              Videocon LED TV Service Menu Code
              Supra LED TV Service Menu Code
              Toshiba LED TV Service Menu Code
              Symphony LED TV Service Menu Code
              Veste/ LED TV Service Menu Code...
              10-31-2024, 03:58 AM
            • Maalobs
              Philips 60PFL8708S/12 - QFU1.2E LA - Error code 53
              by Maalobs
              Hi,

              I have a 2014 vintage Philips 60PFL8708S/12 that suddenly died in the middle of the kids watching a show.

              The relevant service manual for the chassis is available here.
              The TV no longer powers on, and leaving it powered on for a few minutes results in the layer-1 error with 2 blinks.
              When I short the SDM to ground I get the layer-2 error code 53.

              The inside of the TV has no damaged components and no swollen capacitors.
              In SDM-mode when all the power rails are left on despite entering the protection mode, I tracked down and measured...
              04-02-2019, 01:15 PM
            • bohaboha
              error code 0x80072f8f 20000 When widows upgrade to 10
              by bohaboha
              when upgrading windows 7 to windows 10 i get this error code (title).then to correct the error i have to enable tls 1.1 and tls 1.2 in registry editor. but there I do not find TLS 1.1 and TLS 1.2 instead there is SSL2.0
              in REGISTER EDITOR on windows 7 ad can one do to correct the problem?

              Error Code 0x80072f8f 20000
              08-30-2023, 07:06 PM
            • Noobwithamultimeter
              Sharp LC60C6400U - 2 long binks, 5 short blinks error code
              by Noobwithamultimeter
              Hi, long time browser - first time poster. I got my hands on a Sharp LC60C6400U and from what I could find on youtube similar models of this set have a 12V power regulator that fails called "KIA378R12PI". So I go ahead and order the part, install it and badda-bing my set worked right away. Only a problem - it failed after about 3 hours. So I re-attempted my solder joints and it was back in business, for a couple of days. Failed again with the same error code. I think to myself no worries I have 4 spares since I bought a 5 pack in case anything went wrong. But now after roasting the solder...
              04-06-2021, 01:31 PM
            • Sus256
              HISENSE 65E7KQ PRO - no boot
              by Sus256
              Hi all!

              HISENSE 65E7KQ PRO
              RSAG7.820.13512 - chassis
              MT9618BAATAB - cpu
              RSAG7.820.12059 - power
              HD650Y3U77 - panel
              KLM8G1GETF - emmc

              The TV does not turn on, the standby indicator is on. All voltages are present.
              Emms is dead. Not readable, not detected.
              Replaced emmc.
              But with another dump there is no launch

              Terminal log

              UART
              <
              AC_ON
              RPMB key is not yet programmed

              HASH1_VERSION=0x00000000 64bit
              E-B
              FDE enabled
              layout pattern onebin by SAR7,0...
              06-01-2025, 02:11 AM
            • Loading...
            • No more items.
            Working...