Thanks

Hello , please help

lenovo IdeaPad S145 bios
mb FV440 / FS441 / FS540 NM-C121
rev 1.0

This is the original file,won't start, help, please!lenovo IdeaPad S145 bios
mb FV440 / FS441 / FS540 NM-C121
rev 1.0
Flash power led?

Lenovo Ideapad S145-15IWL
MODEL 81MV
SN PF1Y1ZCY​...

Thanks, I tried it but there is no change - it turns on, the button lights up and after a while it goes out and all over again. There is no image and the fan does not spin. I have also tried another bios in which I transferred the DMI area from the original one.​

pls can you help me disable onboard ram for this Lenovo Ideapad 3 [B]15IAU7[/B]

PF3Z2C13pls can you help me disable onboard ram for this Lenovo Ideapad 3 [B]15IAU7[/B]

PF3Z2C13pls can you help me disable onboard ram for this Lenovo Ideapad 3 [B]15IAU7[/B]

PF3Z2C13...

Re: Problem with Nitro AN517-41


I did remove it before changing the display....

Re: Problem with Nitro AN517-41

I did remove it before changing the display.

There is a problem with the laptop. The laptop was working just fine. When I replaced the original display(BOE NE173QHM-NY6 V8.0) with a new one(BOE NE173QHM-NY2 V8.0), it started making problems. It tried to start - the keyboard lighted from left to right and tried to turn on but the display was just black. I waited for 10-15 seconds and I turned it off from the power button. Then I replaced the display back again to the original one and tried turning it on but it just lights the keyboard up and immediately shuts down. Could the problem be because I didn't wait long enough for the BIOS to update...

Re: Sharp LC-46x20e error code

With button on TV green power light comes on but no picture or sound after 20-30 seconds blinking... With remote cannot power off...

Hi all... Please help me understand the error code

[url]https://streamable.com/76nft5[/url]https://Hi all... Please help me und...m/76nft5[/url]

Re: New Members - please post your introductions here

Hello, I was reading the forum for a long time and now I need some help with Sharp 46x20e. I hope I can get help from one of the many talented users here.

Best regards!