Mitsubishi PD-5010

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • PlainBill
    Badcaps Legend
    • Feb 2009
    • 7034
    • USA
    #1

    Mitsubishi PD-5010

    There is a guy locally selling a Mitsubishi PD-5010 plasma tv 'for parts or repair'. He reports that "It shuts down with an orange light". 'Replacing a capacitor' fixed the problem 'for a few hours'.

    I've been unable to locate a list of the status or error indicators for the Mitsubishi plasmas. Wizard, do you have any suggestions?

    PlainBill
    For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

    Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.
    Tags: None
    • PlainBill
      Badcaps Legend
      • Feb 2009
      • 7034
      • USA
      #2
      Re: Mitsubishi PD-5010

      Aw, shoot. I finally found some information. Forget it, it's not worth it.

      PlainBill
      For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

      Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

        Comment

        • weirdlookinguy
          Badcaps Legend
          • Sep 2007
          • 1638
          #3
          Re: Mitsubishi PD-5010

          What did you find out?

            Comment

            • PlainBill
              Badcaps Legend
              • Feb 2009
              • 7034
              • USA
              #4
              Re: Mitsubishi PD-5010

              Originally posted by weirdlookinguy
              What did you find out?
              It's a 2002 model; no HMDI inputs, no DVI inputs, only one set of component inputs.

              PlainBill
              For a number of reasons, both health and personal, I will no longer be active on this board. Any PMs asking for assistance will be ignored.

              Never be afraid to try something new. Remember, amateurs built the ark. Professionals built the Titanic.

                Comment

                Previous template Next

                Related Topics

                Collapse
                • hugocarmo
                  Mitsubishi HS-E82 VCR Bad Picture
                  by hugocarmo
                  Good morning everyone.
                  This time I have a Mitsubishi HS-E82.
                  It was a bargain that I found with original remote included.
                  The problem reported by the owner is that it was working but no output video.
                  I took it appart and immediately saw that three 470uf capacitors were leaking on the signal board and one in the Hi-Fi board the same value too. I have located them in the pictures in red marker.
                  I replaced them, cleaned all the liquid remains and the video output got working again.
                  I saw too that were three surface mounted capacitors, two near the 470uf and...
                  11-21-2023, 04:11 AM
                • sikocan
                  Help identify chip MITSUBISHI ELECTRIC Air-Conditioner Network system
                  by sikocan
                  Looking for a component labelled 56 on top 59 on bottom. It's from a MITSUBISHI ELECTRIC Air-Conditioner Network system. Thanks!...
                  06-13-2023, 08:16 PM
                • sam_sam_sam
                  Mitsubishi CNC switching power supply board dead / relay board bad diode failure
                  by sam_sam_sam
                  I was working on this CNC machine today found no keyboard functioning no control relay powering on
                  The screen powered on and was giving an operation error but the manual was not very clear about what the error exactly was but with a little bit of troubleshooting and finding out that the control relays not powering on and no keyboard functions we narrowed down to this one switching power supply which of course does not have any indicator LED light they are on the keyboard interface/relay controller board

                  Found shorted diodes on main controller relays there are 3 of them that...
                  01-07-2023, 05:43 PM
                • michalk3777@gmail.com
                  Looking for discontinued Mitsubishi MCU - M306N1MCT
                  by michalk3777@gmail.com
                  Hello,
                  If this is not correct forum I apologize, I looked on the store page but did not see anything even close to this.
                  I need help finding a replacement MCU. Its from a Seadoo gauge cluster. Made by Mitsubishi, part No. M306N1MCT-203FP (bottom one on the picture, specs. attached). Cannot locate it anywhere. If anyone can point me to where I could find one in either USA or Canada that would be greatly appreciated.

                  Regards,
                  Michal...
                  09-03-2022, 12:30 PM
                • Keshenatech1
                  Mitsubishi LT-52149 help
                  by Keshenatech1
                  Has anyone out there had any experience with the Mitsubishi LT-52149? (The LT-46149 is identical and uses the same main and power boards, just a smaller panel) I have one that is very intermittent and normal logical troubleshooting steps are not working for me. The set came in with a no sound/no picture problem. After I hit the reset button on the control panel, I got it to come on one time. Snowy screen and loud static in the speakers so I hit the input button to try to switch to an HDMI to quiet it down. It said it was adjusting something and then just shut down. I held the menu and input buttons...
                  12-20-2020, 11:03 AM
                • Loading...
                • No more items.
                Working...