LG LCD 32LW5590 no signal

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • crozoki
    Member
    • Feb 2013
    • 44
    • Croatia
    #1

    LG LCD 32LW5590 no signal

    Tv work but no picture. only say that no signal.
    About a month ago tv not working at all. i do reflow chip on main board and tv works for about mounth. Do i need reflow again?
    Attached Files
    Last edited by crozoki; 01-23-2020, 07:35 AM.
    Tags: None
    • nomoresonys
      Badcaps Legend
      • Jan 2013
      • 12276
      • U.S.
      #2
      Re: LG LCD 32LW5590 no signal

      Sure try another reflow if it works consider a fan solution to keep the chip cooler.
      Last edited by nomoresonys; 01-23-2020, 07:50 AM.

        Comment

        • crozoki
          Member
          • Feb 2013
          • 44
          • Croatia
          #3
          Re: LG LCD 32LW5590 no signal

          reflow again. tv works. now i need to figure out how to do cooling.

            Comment

            Previous template Next

            Related Topics

            Collapse
            • vf fa
              EIZO CX270 - No signal but Backlight and Panel works, logo works, admin menu works. OSD doesn't. What?!
              by vf fa
              Hi, so i guess I´ll have to make a new topic here, as i browsed through hundreds of other threads but couldn't find a solution to my problem yet.

              I got a EIZO CX270 from a friend. He said it doesn't work anymore and wont display any signal or take any OSD inputs. Well, as an aspiring photographer I couldn't say no, could I? Thought it was an easy game, replace a bad cap and have a working monitor. But nooope, it wasn't supposed to be this easy.

              So let me start with the problem description. I'll try my best not to skip anything so this might get rather long.
              ...
              01-31-2024, 01:40 PM
            • AstutePauciloquent
              Requesting Help For GA-970A-DS3 rev. 1.0, No Post code, no RSMRST# signal
              by AstutePauciloquent
              Hi everyone, over the past few months i have taken a deep dive into motherboard diagnostics and I love the challenge. Currently im trying to learn all about the signals that travel around the motherboard, such as frequencies, enable signals High and Low logic states etc. And i have been learning to read and using the Schematics for this board that i requested here on Badcaps forum, from a few months ago, this is such a great place for these.

              I’ve been working on a GA-970A-DS3 (rev. 1.0) that does not post. This motherboard has been my main learning board. I would like share...
              11-23-2023, 11:02 PM
            • howardc64
              Vizio M65Q7-H1 Red Vertical Strips fixed by tape blocking LC1 signal to half of the panel
              by howardc64
              Failure Symptom



              No picture, just red vertical stripes. Google search shows quite common problem for these recent Vizio M series although red vertical stripe pattern may differ. Some call it "Netflix" boot screen haha.

              Where is the short?

              Panel has 4x buffer boards. Quickly found the 1/4 panel buffer board with the problem by selectively disconnecting buffer board flex cables.



              Having recently fixed another Vizio with similar symptoms that was a shorted ESD diode array ( link ) Probed the ESD diode array but...
              05-27-2025, 02:56 PM
            • JayPoorJay
              Converting +/- 5v to a Usable Hz Signal
              by JayPoorJay
              Good morning.

              I have posted here before and have gotten AMAZING advise (thank you!). I'm back for more. This BCaps Sub Forum is so well attended I thought I would post here.

              This question is for an automotive application but has to do with what are essentially electrical questions and problem solving... If this is inappropriate I get it. Feel free to delete it or move the question.

              The V 12 Jaguar XJS is notorious for overheating in stop and go traffic in hot weather... Y'all will be potentially helpinh a LOT of people. The solutions and directions...
              08-07-2022, 08:35 AM
            • CoinCoin88
              Garage door RX unit (Cardin S38C) does not short relay to send opening signal
              by CoinCoin88
              Hello everyone,

              I'm turning to the Badcaps community to help me troubleshoot the radio Rx card from my (old) garage door opener. While I could just ditch that card and replace the whole system, I first would like to understand "why" it suddenly stopped working, because that's just how I am wired...!

              Some basics: the receiver works on a 30.875 Mhz frequency. Yes, I'm aware this is not in use anymore in a looot of places. It does not use any rolling code, it's just a regular dip-switch code that you have to set up on both the receiver and transmitter. The receiver...
              09-15-2025, 03:36 AM
            • Loading...
            • No more items.
            Working...