Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • ECNiz
    New Member
    • Nov 2019
    • 5
    • US
    #1

    Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

    I have a Samsung UN55H6300AFXZA TV. It was working great until it stopped working a day after a power outage. Our neighbor had to replace their satellite receiver box, so I'm assuming there was a surge in the lines before or after the outage.

    The TV would not power on, the standby light would just blink when I tried to turn it on with the remote. I purchased a replacement main board on eBay. With the new main board installed, the TV will now power up and show the SmartTV logo before going to a black screen. It seems like an improvement. I'm not sure what to do now though. I've tried Mute-8-1-2-Power, and get the same thing. I've also tried Exit (12 sec) - Left - Enter.

    The part number on both original and replacement main boards is B94-07774Q.

    The original board has "PC05" on the sticker and the replacement board has "PC01".

    Does anyone have any ideas of what I could try next?

    Thanks!
    Tags: None
    • CapLeaker
      Leaking Member
      • Dec 2014
      • 8352
      • Canada
      #2
      Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

      check the tcon. maybe unplug one side off the panel from the tcon, turn the tv on, see what happens, then the same thing on the other side. It may be that the tcon is bad too.
      Last edited by CapLeaker; 12-01-2019, 10:48 AM.

        Comment

        • nomoresonys
          Badcaps Legend
          • Jan 2013
          • 12323
          • U.S.
          #3
          Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

          And see if you have about 12 volts on each side of the tcon fuse if you have a multimeter and want to troubleshoot, as always BE VERY CAREFUL when working with the powerboard, there are DEADLY voltages on the hot side.

            Comment

            • ECNiz
              New Member
              • Nov 2019
              • 5
              • US
              #4
              Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

              Originally posted by CapLeaker
              check the tcon. maybe unplug one side off the panel from the tcon, turn the tv on, see what happens, then the same thing on the other side. It may be that the tcon is bad too.
              I'll take a look. Would it still show the Smart TV logo on the screen if the TCON is bad? Doesn't the fact that a picture (the logo) is showing mean the TCON is OK?

                Comment

                • CapLeaker
                  Leaking Member
                  • Dec 2014
                  • 8352
                  • Canada
                  #5
                  Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

                  A bad ic could work for a short time, then quit. You may need to borrow a oscilloscope and test the lvds on the main board as well. Do the backlights stay on, when it is hung up?

                    Comment

                    • ECNiz
                      New Member
                      • Nov 2019
                      • 5
                      • US
                      #6
                      Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

                      The backlights stay on for ~60 seconds after initial power on. If I disconnect either TCON cable, I get no smart tv logo, just the backlights come on. Voltage on either side of the TCON fuse is ~12.5VDC.

                      Any other ideas?

                        Comment

                        • CapLeaker
                          Leaking Member
                          • Dec 2014
                          • 8352
                          • Canada
                          #7
                          Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

                          Does your tv has a wifi module? If it does, disconnect it and power the tv on.

                            Comment

                            • ECNiz
                              New Member
                              • Nov 2019
                              • 5
                              • US
                              #8
                              Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

                              I tried unplugging the wifi module, no change.

                                Comment

                                • CapLeaker
                                  Leaking Member
                                  • Dec 2014
                                  • 8352
                                  • Canada
                                  #9
                                  Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

                                  Well, I guess the only thing you can do is to check the lvds on the main board with an oscilloscope. Probe the lvds pairs and flick the menu on and off all the time on the remote. Does the tv stay powered up without the tcon? Other than that, I’d say you have a bad main board. It almost sounds like a bad or corrupt flash, or bad flash IC.

                                    Comment

                                    • nomoresonys
                                      Badcaps Legend
                                      • Jan 2013
                                      • 12323
                                      • U.S.
                                      #10
                                      Re: Samsung UN55H6300AFXZA TV - Smart TV Logo, then black screen

                                      So with everything hooked up do you have backlights on and just a black screen or they go out in 60 seconds?

                                        Comment

                                        Previous template Next

                                        Related Topics

                                        Collapse
                                        • Schule04
                                          Samsung UE48H6270SSXZG black screen after Smart TV logo
                                          by Schule04
                                          Samsung UE48H6270SSXZG

                                          Power supply is BN44-00709A
                                          Mainboard is BN94-07385J

                                          Got this TV from Ewaste.

                                          Symptoms
                                          The power LED comes on when plugged in. After pressing the power button the backlight lights up and stays lit. The Samsung Smart TV logo fades in and out. After that the display stays black and doesn't react to buttons on the TV or remote. TCON board has 3 blue LEDs which are lit. A small part of the backlight seems to flicker when the TV is powered up. TV shuts off after some minutes.

                                          Attempted troubleshooting...
                                          07-01-2022, 05:56 PM
                                        • HTR-Informatique
                                          Dell G3 15 3500 - Battery bug (black screen and flashing keyboard backlight)
                                          by HTR-Informatique
                                          Hello,

                                          YouTube video of the problem encountered: https://youtube.com/shorts/q7TLNv36LUo

                                          I am a pro and I have a problem that I have never seen despite my 7.5 years of experience on my own and my thousands of repairs, on a customer's Dell G3 15 3500.

                                          On this PC I have already changed the complete palmrest because the keyboard was no longer working properly.

                                          I also changed the screen because the PC fell and the screen was broken.

                                          I changed the battery with a new and original battery.

                                          I also had corrosion/oxidation on the...
                                          02-09-2025, 06:51 AM
                                        • Mgiffune
                                          Samsung UN60EH6000F Black Screen, Backlight and Sound Good. Power Cycle Returns Picture
                                          by Mgiffune
                                          I have a 60 inch Samsung UN60EH6000F flatscreen TV. The screen went black a few months ago Sound is good, backlight is good, no menu. I replaced the TCon board with a used board purchased from Ebay. It worked fine for a 3-4 months, then the screen started ‘fading' back. Once again, sound is good, backlight is good, no menu. However, this time the picture looks fine for about 10-15 minutes, then fades back. If I power cycle the TV, the display reappears, for another 10-15 minutes, then fades black again. Repeatable ever time.

                                          I ordered a supposedly ‘new' Tcon board this time, and                                          ...
                                          06-09-2024, 10:28 AM
                                        • howardc64
                                          A1312 (27” iMac 2009-2011) A1407 (Thunderbolt Display) A1316 (Cinema Display) Display Black Screen Repair
                                          by howardc64
                                          Problem

                                          This is an LG edge LED lit LCD Display. The LEDs are on the bottom edge of the display. There are 2 bars (left and right) Each bar has many LEDs and a 6 pin connector. Each pin drive several LEDs thus is the highest current flow / heat junction. The weak lead free solder gradually fails with thermal expansion/contraction cycling and increases resistance. PSU will compensate up to a point, then when the current is too high, PSU just shut down the backlight causing a dark display. I have even seen one which the connector just fell off as solder points became completely detached....
                                          08-04-2024, 10:36 PM
                                        • VcemPzd
                                          Black screen Lenovo legion 5 pro 16ACH6H gaming laptop
                                          by VcemPzd
                                          Hello everyone !

                                          My name is Chris, I am a 30 years old embedded software developer working in the automotive industry. I am really passionate about learning new skills and repairing/crafting stuff. I came around this forum last week with the goal of repairing my faulty gaming laptop, indeed, I was video editing on it when suddenly a black screen popped and never disappeared I bought some stuff to try to repair it and learn as many things as possible about computer repairs but nothing worked so far. When the black screen appeared, my legion 5 pro was connected to my external monitor...
                                          04-28-2025, 10:14 AM
                                        • Loading...
                                        • No more items.
                                        Working...