Thomson 55UC6006S Shutdown after loading android logo.
Thomson 55UC6006S Shutdown after loading android
Collapse
X
-
Re: Thomson 55UC6006S Shutdown after loading android
the tcon has got two cables on the top can you remove one end and see if the set stays on if no refit and try the other sideComment
-
Re: Thomson 55UC6006S Shutdown after loading android
if this was my set i would try a replacement mainboard as possible the firmware has issues hence the reboot maybe see what other more experienced users say first as mainboards are quite expensive and you need one that matches the stickers etc from your old mainboardComment
-
Re: Thomson 55UC6006S Shutdown after loading android
Hello friends. I have the same TV, and the same problem, I think the firmware is to blame, but I can't find a factory one or another, or I'm looking in the wrong place. Can someone share a link to the firmware, or can someone do it and someone else has such a firmware of any version. I'll be very thankful..Comment
Related Topics
Collapse
-
by reassorHi.
Power is ok
Tv turns on by it self when you turn IT off with button or pług.it shows sony logo the android logo but with like 1 frame every 10 sec. Music starts after like 1 min. After some time logo will Just hang. But i can turn volume up and down on a pilote but its very slow as well.
Should i force update? If so how?
I did reset.
Mainboard Looks pristine.
Very wierd. -
by IhandyrepairHI guys
I got here a Sony 65X950G - I tried to find any repairs guides for this model but not many online
here is the issue
I have Sony and android logo. but then 4 led red flash lights front of the tv
I have 3.3v ref. 12v reg then T con 12v when I press the power on button
but then I get black screen and 4 red flash light at the front LED
but I get 3 led flash on the LED driver board.
I check that few X900F or C YouTube repairs, seems that if you have 4 led red flash it could be due of LED black light error
so I tried... -
Hi! Problem with an Acer Aspire ES1-132 that is taking an eternity to load Windows. All you can see is the Acer logo and the loading icon (white dots going in circles). I have tried using a bootable flash drive (Windows installer in GPT). Still the same. I have already performed a BIOS update (versions 1.13 and 1.15) thinking that it has something to do with it. No improvement. Any suggestions? Thanks!
-
by Teban1306[REQUEST] ThinkPad T14 Gen 1 (20S1) - Custom Boot Logo Modification
Hello everyone!
I hope this is the right section for this request. I'm looking for help to modify the boot logo on my ThinkPad T14 Gen 1.
System Information:- Model: Lenovo ThinkPad T14 Gen 1
- Machine Type: 20S1S4E600 (Intel i7 variant)
- Current BIOS: N2XET42W (1.33) - Latest version
- BIOS File: n2xuj25w.exe (12.98 MB) - Downloaded from Lenovo support
Replace the default "LENOVO" boot logo with a custom image during POST.
🔧 What I've tried:- [
-
Channel: BIOS Requests ONLY!
-
by leszekpI have 43UG6300 with logo and nothing more . I can't update via usb .I can't unlock uart .After change dump emmc same situation . Is it possible to unlock uart in this situation ? Short uart log in attachment . I am not sure - hardware , or software fault ....07-28-2023, 12:49 PM
- Loading...
- No more items.
Comment