l39d2900 tcl works for 3 sec

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • mazloum
    Badcaps Veteran
    • Sep 2012
    • 504
    • Lebanon
    #1

    l39d2900 tcl works for 3 sec

    hi
    l39d2900 tcl works for 3 sec picture ok , but after that all lights even the power led will go off, when i replug the cord it will just work for 1 sec and after that it will not work again
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • ktmmotocross
      Vector Network Analyzer - USB works only with mouse, not work with usb key
      by ktmmotocross
      my mate have very expencive tool with USB port that works only with mouse, not with usbkey.
      where to search for fault?
      06-26-2025, 02:32 AM
    • tvguy12012012120
      Zombie Samsung UN55NU6900F dead / no standby voltage - randomly came to life after hours of troubleshooting then died
      by tvguy12012012120
      This is my first attempt at troubleshooting a board like this, I know I could just buy a new board but I'm curious to figure out how this works. I've been testing different components in the evenings this week and I think the problem is with the IC failing to start up for some reason. When the board is plugged in there is no standby voltage.

      Then today it randomly sprung to life like a zombie but shortly died thereafter. I have no idea why it would have done that and its the first time I've seen it running. I discharged capacitors on the board last night, then it was sitting today....
      02-07-2025, 05:13 PM
    • bobbyskillz
      Vizio E241i-a1 - works, but OSD stuck and no buttons work
      by bobbyskillz
      Hello, experts! I have a weird issue I've never seen before. I know some of you have definitely seen this. I think some have seen in. I'd greatly appreciate any advice you can give me.

      I bought a E241i-a1 to use as a monitor. It powers on, displays the image, and has sound. I just can't get the OSD to go away. The TV doesn't respond to any input from the remote contol or buttons except for the power button. Is this a firmware issue? I can't access settings to reset it. A quick search for the firmware has no results. I'm lost. Please throw some ideas at me.

      Thanks for...
      07-02-2025, 03:43 PM
    • MichelinMan
      CF-20 Toughbook (mk1) Trackpad/Touchpad and USB ports not working
      by MichelinMan
      Hey guys,

      Just purchased a CF-20 (mk1) supposedly was all working. However, the seller had done a fresh install of windows 10 but did not install any driver. Seller was adamant the trackpad/touchpad was working.

      The touchpad/trackpad does not work. No led lights near the trackpad. The keyboard works, the USB 2 port on the base does not work, The USB 3 ports will recognise a USB 3 flashdrive but did not recognise a USB mouse. The ethernet port on the keyboard section works.

      The USB 3 port on the actual tablet section works with no issues.
      ...
      07-18-2023, 08:12 AM
    • huzo
      HP Pavilion 15-ec1060nm bios
      by huzo
      Guys i have the same laptop, someone before me tried flashing some bios, but it was the wrong one,because only power button got on for a second and then off...i took this dump from post #4 and injected win key and DMI, now the board turns on,caps lock works, usb mouse works, but no image, not even on the HDMI...So the board works , but no image...I don't know what they did before me, maybe the screen is bad,backlight died or something like that...

      Here is the SN 5CD0491ZQ3 and current dump, maybe the dump is for a different processor?? i've attached old dump with only power button...
      08-30-2025, 01:15 PM
    • Loading...
    • No more items.
    Working...