HP Pavilion 15-ec1060nm bios

[huzo]

Guys i have the same laptop, someone before me tried flashing some bios, but it was the wrong one,because only power button got on for a second and then off...i took this dump from post #4 and injected win key and DMI, now the board turns on,caps lock works, usb mouse works, but no image, not even on the HDMI...So the board works , but no image...I don't know what they did before me, maybe the screen is bad,backlight died or something like that...

Here is the SN 5CD0491ZQ3 and current dump, maybe the dump is for a different processor?? i've attached old dump with only power button on for a second and flashed bios with DMI and WINKEY injected, but no image ,keyboard lights up,caps works,usb keyboard an touchpad work...but no image on HDMI or LCD...

NVM it was the screen..someone before me didn't probably unplug the battery and it killed the screen,not the fuse in the screen,they are both good, LED controller probably,since no backlight is present, but 3.3V is..

So the dump works 100%

[m1ch43lzm]

Your original dump has original serial, it's the same BID 087B0 as post 4 (ver. F.32 extracted from HP website)

Try F.25 downloaded from HP website by entering your S/N, same version as your dump, with your serial/win key inserted
HP Pavilion - 15-ec1060nm
BID 087B0
S/N 5CD0491ZQ3

-------------------
But if it reacts to Caps lock it's most likely not a BIOS issue
LCD is connected to AMD CPU, and the HDMI port is connected to NVIDIA GPU, you have to boot into the OS and enable the secondary display to get HDMI output
Please open a new thread in the troubleshooting laptops section for hardware issues
https://www.badcaps.net/forum/troubl...mobile-devices