Samsung UE55H6200 Sound but no video display

[Nix125]

Re: Samsung UE55H6200 Sound but no video display

Hi all thanks for the info. I will take a look later when back from work.

[nomoresonys]

Re: Samsung UE55H6200 Sound but no video display

This is interesting, if you could fix your tcon, you would have a spare.

[budm]

Re: Samsung UE55H6200 Sound but no video display

1) There is at least 1 LED that I see, LED3_AVDD next to RD02 component. I expect this LED to come on if the boosted AVDD Voltage is present.
2) I see VGH and VCOM test points close to IC U0205.
3) I see V12 test point next to inductor L202.
4) What is the P/N of U0201?
I cannot see the rest of the test points due to poor picture that is not on focus.
You need to take hi-res straight shot of the whole T-CON board.

[budwich]

Re: Samsung UE55H6200 Sound but no video display

Hey nomoresonys I can see VGHC, VGL and VGB12 on the TCOM board is this the pads to check. I have a multimeter what am I checking for? Thanks

good question but probably not important. The reason being, is just measure and post the results. The "wrong voltage" will usually standout... low, high or otherwise. You aren't looking for an absolute value at this point.

further, the labeling isn't going to be "exact" for all set and hence look for things like "VXXX" or so as potential points of interest. As budm has indicated, those that he listed are a good "type" to look for.

[Nix125]

Re: Samsung UE55H6200 Sound but no video display

�� lol were see if the Tcom board I ordered will fix the tv should arrive late next week.

[nomoresonys]

Re: Samsung UE55H6200 Sound but no video display

Damn if I know, I was trying to learn what they should read myself.

[Nix125]

Re: Samsung UE55H6200 Sound but no video display

Hey nomoresonys I can see VGHC, VGL and VGB12 on the TCOM board is this the pads to check. I have a multimeter what am I checking for? Thanks

[nomoresonys]

Re: Samsung UE55H6200 Sound but no video display

Did you test those three spots in Buds post #14? VGH
VCOM
V12

[Nix125]

Re: Samsung UE55H6200 Sound but no video display

Hi nomoresonys thanks for the links on ebay I checked them out a few days ago hopefully tcon board will fix the issue. Dudm we tried with and without the lcd connect which made no difference. There is no led on the tcon board?

Many thanks

[budm]

Re: Samsung UE55H6200 Sound but no video display

https://www.badcaps.net/forum/attach...2&d=1566036467
Check: with and without ribbon cables between the LCD panel connected. Do not disconnect and re-connect any cables when TV is plugged into the outlet.
VGH
VCOM
V12

Does LED3_AVDD light up when TV is turned on?

[nomoresonys]

Re: Samsung UE55H6200 Sound but no video display

Just in case it can't be fixed, list there, the first one has a bit different numbers think I would skip that one, but from 2 down a ways look like a match, they seem to have a bunch of them, they also have a make offer option: https://www.ebay.co.uk/sch/i.html?_f...vn05.7&_sop=15

[nomoresonys]

Re: Samsung UE55H6200 Sound but no video display

One there that seems to be a match: https://www.ebay.co.uk/itm/5555T10C0...UAAOSw2QtdJ2za

[nomoresonys]

Re: Samsung UE55H6200 Sound but no video display

See the labels vgb 14, vgb13 etc, and the little round copper looking pads, there's like 28 or so, those are test points but I don't know what voltage they should be.

[Nix125]

Re: Samsung UE55H6200 Sound but no video display

Thanks for looking nomoresonys. Take a look at my attachment you should be able to zoom up as its decent resolution?

[nomoresonys]

Re: Samsung UE55H6200 Sound but no video display

To be honest I have trouble knowing what the voltages should be, haven't had to deal with them very often, well lets see which one you have, what are the first 10 letter/numbers on your white sticker? Should start with bn-96xxx.

[Nix125]

Re: Samsung UE55H6200 Sound but no video display

Thanks for the reply do you have any guidence on how to test?

[nomoresonys]

Re: Samsung UE55H6200 Sound but no video display

It is looking like a faulty tcon, I would try one if they're not to expensive, tcon can be tested, how to test can be confusing tho if not clearly marked.

[Nix125]

Re: Samsung UE55H6200 Sound but no video display

Hi neilc6, I've tried disconnecting the ribbon cables one at a time and have the same issue. It seems that as soon as the t con board is connected the leds go out even with no ribbons connected to the LCDs. There are no lights built onto the tcon board. Could it be a faulty tcon board?

[neilc6]

Re: Samsung UE55H6200 Sound but no video display

Disconnect ribbon cables (unplugged) one at a time and see if you get a picture.

https://www.badcaps.net/forum/showthread.php?t=50646

[Nix125]

Re: Samsung UE55H6200 Sound but no video display

Ok so when I disconnect the power board from the main board I can see the LEDs light up from the holes behind. Coincidentally it seems that if I keep the power connect to the main board and disconnect the tcon board the LEDs do light up. What can you make from this?

Kind regards