Hey guys need some help with this one. I've changed the three caps on the
y sustain board. If cable between the y sustain and the control board is removed the svc_vs,vscan as well as the voltages on the x board stay up.
If cable is reconnected voltages come up briefly and go down. Never see the
screen prime. What am i missing thanks
y sustain board. If cable between the y sustain and the control board is removed the svc_vs,vscan as well as the voltages on the x board stay up.
If cable is reconnected voltages come up briefly and go down. Never see the
screen prime. What am i missing thanks
Comment